BER counter

[justdream]

Dears,

Are there any 2G counters that could indicates cells suffer from high BER?

[Handover24]

Radio quality gives you that.
BR
Handover24

[auto_art]

Dears,

Are there any 2G counters that could indicates cells suffer from high BER?

are you talking about BER on LAPd interface? it is available in Huawei, search counter for error seconds.

[justdream]

Yes, I'm talking about BER on LAPD

[Handover24]

If you are talking about BER on LAPD just check "TRAU frame on HEdex" you will get all...( also PTRAU for PS service ).
Regards.

[auto_art]

untitled.jpg

hi check this..

[hamody2005]

Dears,

Are there any 2G counters that could indicates cells suffer from high BER?

In Huawei CDMA system you can run this Command

Run the LST CBTSLNKERRCNT FOR (CBTS) or LST BTSLNKERRCNT FOR(BTS)command to query the number of BTS link errors.

1. 
   The number of BTS link errors is saved in a file in the following paths by default:
   
   • D:\Airbridge\services\E1ERRCNT. The file name is BTSXXXLinkErrorCount.txt, where XXX is the BTS ID, which consists of three digits and starts with 0 if the BTS ID does not reach three digits. (BTS V300R001)
   • D:\Airbridge\services\LinkErrCnt\. The file name is BTSXXXXLinkErrorCount.txt, where XXXX is the BTS ID, which consists of four digits and starts with 0 if the BTS ID does not reach four digits. (BTS V300R002 and its later versions)
   
   
   
   
   
   If it's helpful don't forget Rep.