View Full Version : Question Huawei Power Control III (PWRCTRL 3)
beniy
2012-06-28, 07:19 PM
Dears.
Please support about the algo of PCIII
Thanks in advance for your support.
BR,
Beniy
Shakeel_15
2012-06-28, 08:25 PM
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BR
Dears.
We implemented PWR CTRL III in our network, with default values UL Qual improved but DL quality degraded.
We tried to recover DL quality with windows size but no success.
Please help us and share optimum parameter values.
If you had same experience please share.
All the answers are welcomed and feedback is reputation and thanks as small appreciation to your support.
Thanks in advance for your support.
BR,
Beniy
beniy
2012-06-28, 08:41 PM
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BRDear friend,
We activated in first step :-( please give all the recommendation if you activated and got improvement.
usama0795
2012-06-29, 06:10 PM
Setting showed improvement.... Designated power control window for quality in both UL and DL are designed to be one shot.
28274
justdream
2012-06-29, 06:35 PM
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BR
Dear Shakeel_15,
Could you please share document describe the idea of PWRCTRLOPTIMIZEDEN
Also could you please share the impact on your network after enable it,
as the defualt value as per Huawei parameters desciption is set it to NO
Thanks
beniy
2012-06-29, 08:33 PM
Setting showed improvement.... Designated power control window for quality in both UL and DL are designed to be one shot.
28274Dear usama0795,
At first thanks for your reply, we had implemented almost same config, but UL improved and DL degrade.
Let me implement all of them and inform you.
Thanks again for your support
bdplanner
2012-06-30, 02:36 PM
the following value was proposed by huawei during e******* to huawei swap. Also PWRCTRLOPTIMIZEDEN was set to YES
Parameter Name
Existing Value
Plan_Value
DLADJPRD
3
2
DLAFSREXQUALHIGHTHRED
16
19
DLAFSREXQUALLOWTHRED
16
19
DLAHSREXQUALHIGHTHRED
16
19
DLAHSREXQUALLOWTHRED
16
19
DLFSREXQUALHIGHTHRED
18
19
DLFSREXQUALLOWTHRED
18
19
DLHSREXQUALHIGHTHRED
21
19
DLHSREXQUALLOWTHRED
21
19
DLREXLEVADJFCTR
3
1
MRMISSNUM
5
3
ULAFSREXQUALHIGHTHRED
16
19
ULAFSREXQUALLOWTHRED
16
19
ULAHSREXQUALHIGHTHRED
16
19
ULAHSREXQUALLOWTHRED
16
19
ULFSREXQUALHIGHTHRED
18
19
ULFSREXQUALLOWTHRED
18
19
ULHSREXQUALHIGHTHRED
21
19
ULHSREXQUALLOWTHRED
21
19
ULMAXDOWNSTEP
6
12
ULMAXUPSTEP
8
20
ULREXLEVADJFCTR
3
1
ULREXQUALADJFCTR
6
7
ULREXLEVHIGHTHRED
18
20
ULREXLEVLOWTHRED
18
20
DLMAXDOWNSTEP
6
12
DLMAXUPSTEP
8
20
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.