-
Huawei Power Control III (PWRCTRL 3)
Dears.
Please support about the algo of PCIII
Thanks in advance for your support.
BR,
Beniy
Last edited by beniy; 2012-12-07 at 08:29 PM
-
2012-06-28 07:19 PM
# ADS
Circuit advertisement
-
Member
Reputation: 295
Re: Huawei Power Control III (PWRCTRL 3)
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BR
Originally Posted by
beniy
Dears.
We implemented PWR CTRL III in our network, with default values UL Qual improved but DL quality degraded.
We tried to recover DL quality with windows size but no success.
Please help us and share optimum parameter values.
If you had same experience please share.
All the answers are welcomed and feedback is reputation and thanks as small appreciation to your support.
Thanks in advance for your support.
BR,
Beniy
-
Re: Huawei Power Control III (PWRCTRL 3)
Originally Posted by
Shakeel_15
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BR
Dear friend,
We activated in first step :-( please give all the recommendation if you activated and got improvement.
Last edited by beniy; 2012-06-28 at 08:44 PM
-
1 out of 1 members found this post helpful.
Re: Huawei Power Control III (PWRCTRL 3)
Setting showed improvement.... Designated power control window for quality in both UL and DL are designed to be one shot.
Attachment 28274
-
Senior Member
Reputation: 491
Re: Huawei Power Control III (PWRCTRL 3)
Originally Posted by
Shakeel_15
Hi,
Ok After enabling Power control-3, Please check the following parameter.
PWRCTRLOPTIMIZEDEN
Please check either this is enabled or not. If not please enable it and share the results after that.
BR
Dear Shakeel_15,
Could you please share document describe the idea of PWRCTRLOPTIMIZEDEN
Also could you please share the impact on your network after enable it,
as the defualt value as per Huawei parameters desciption is set it to NO
Thanks
-
Re: Huawei Power Control III (PWRCTRL 3)
Originally Posted by
usama0795
Setting showed improvement.... Designated power control window for quality in both UL and DL are designed to be one shot.
Attachment 28274
Dear usama0795,
At first thanks for your reply, we had implemented almost same config, but UL improved and DL degrade.
Let me implement all of them and inform you.
Thanks again for your support
-
Member
Reputation: 140
1 out of 1 members found this post helpful.
Re: Huawei Power Control III (PWRCTRL 3)
the following value was proposed by huawei during e******* to huawei swap. Also PWRCTRLOPTIMIZEDEN was set to YES
Parameter Name |
Existing Value |
Plan_Value |
DLADJPRD |
3 |
2 |
DLAFSREXQUALHIGHTHRED |
16 |
19 |
DLAFSREXQUALLOWTHRED |
16 |
19 |
DLAHSREXQUALHIGHTHRED |
16 |
19 |
DLAHSREXQUALLOWTHRED |
16 |
19 |
DLFSREXQUALHIGHTHRED |
18 |
19 |
DLFSREXQUALLOWTHRED |
18 |
19 |
DLHSREXQUALHIGHTHRED |
21 |
19 |
DLHSREXQUALLOWTHRED |
21 |
19 |
DLREXLEVADJFCTR |
3 |
1 |
MRMISSNUM |
5 |
3 |
ULAFSREXQUALHIGHTHRED |
16 |
19 |
ULAFSREXQUALLOWTHRED |
16 |
19 |
ULAHSREXQUALHIGHTHRED |
16 |
19 |
ULAHSREXQUALLOWTHRED |
16 |
19 |
ULFSREXQUALHIGHTHRED |
18 |
19 |
ULFSREXQUALLOWTHRED |
18 |
19 |
ULHSREXQUALHIGHTHRED |
21 |
19 |
ULHSREXQUALLOWTHRED |
21 |
19 |
ULMAXDOWNSTEP |
6 |
12 |
ULMAXUPSTEP |
8 |
20 |
ULREXLEVADJFCTR |
3 |
1 |
ULREXQUALADJFCTR |
6 |
7 |
ULREXLEVHIGHTHRED |
18 |
20 |
ULREXLEVLOWTHRED |
18 |
20 |
DLMAXDOWNSTEP |
6 |
12 |
DLMAXUPSTEP |
8 |
20 |
Bookmarks