koepret
2011-06-18, 01:09 PM
GSM BSS Network KPI (RxQuality) Optimization Manual
Contents
1 Basic Principle
1.1 Definition
1.2 Theory Introduction
1.3 Recommended Formula
1.4 Signaling Procedure and Statistical Point
2 Influencing Factors
3 Analysis Process and Optimization Methods
3.1 Analysis Process
3.1.1 Procedures for RxQuality Problem Location
3.2 RxQuality Optimization Methods
3.2.1 Poor RxQuality on Entire Network
3.2.2 Passive Intermodulation
3.2.3 Intra-Network Interference
3.2.4 Inter-Network Interference
3.2.5 Hardware Fault
3.2.6 Huawei Anti-Interference Technology
3.2.7 Test Tool and Recommendations
3.2.8 Recommendations for Configuration and Test
4 RxQuality Optimization Cases
4.1 Low RxQuality in Kenya
4.2 Enabling Idle Burst Causing Interference Increase and Low RxQuality
5 Information Feedback
5.1 TEMS Test Log of Faulty Cell
5.2 Requirements for Existing Network Configuration Data and Traffic Measurement
without pass , enjoy it
Koepret
==================
Please Kindly add thanks and my reputation , if you fell usefull
Contents
1 Basic Principle
1.1 Definition
1.2 Theory Introduction
1.3 Recommended Formula
1.4 Signaling Procedure and Statistical Point
2 Influencing Factors
3 Analysis Process and Optimization Methods
3.1 Analysis Process
3.1.1 Procedures for RxQuality Problem Location
3.2 RxQuality Optimization Methods
3.2.1 Poor RxQuality on Entire Network
3.2.2 Passive Intermodulation
3.2.3 Intra-Network Interference
3.2.4 Inter-Network Interference
3.2.5 Hardware Fault
3.2.6 Huawei Anti-Interference Technology
3.2.7 Test Tool and Recommendations
3.2.8 Recommendations for Configuration and Test
4 RxQuality Optimization Cases
4.1 Low RxQuality in Kenya
4.2 Enabling Idle Burst Causing Interference Increase and Low RxQuality
5 Information Feedback
5.1 TEMS Test Log of Faulty Cell
5.2 Requirements for Existing Network Configuration Data and Traffic Measurement
without pass , enjoy it
Koepret
==================
Please Kindly add thanks and my reputation , if you fell usefull