Thanks Thanks:  3
Showing results 1 to 6 of 6

Thread: GSM BSS Network KPI (RxQuality) Optimization Manual

  1. #1
    VIP Member Reputation: 1625
    Join Date
    2008-08-14
    Location
    RF Class ...
    Posts
    541


    Default GSM BSS Network KPI (RxQuality) Optimization Manual


    GSM BSS Network KPI (RxQuality) Optimization Manual

    Contents
    1 Basic Principle
    1.1 Definition
    1.2 Theory Introduction
    1.3 Recommended Formula
    1.4 Signaling Procedure and Statistical Point
    2 Influencing Factors
    3 Analysis Process and Optimization Methods
    3.1 Analysis Process
    3.1.1 Procedures for RxQuality Problem Location
    3.2 RxQuality Optimization Methods
    3.2.1 Poor RxQuality on Entire Network
    3.2.2 Passive Intermodulation
    3.2.3 Intra-Network Interference
    3.2.4 Inter-Network Interference
    3.2.5 Hardware Fault
    3.2.6 Huawei Anti-Interference Technology
    3.2.7 Test Tool and Recommendations
    3.2.8 Recommendations for Configuration and Test
    4 RxQuality Optimization Cases
    4.1 Low RxQuality in Kenya
    4.2 Enabling Idle Burst Causing Interference Increase and Low RxQuality
    5 Information Feedback
    5.1 TEMS Test Log of Faulty Cell
    5.2 Requirements for Existing Network Configuration Data and Traffic Measurement


    without pass , enjoy it

    Koepret
    ==================
    Please Kindly add thanks and my reputation , if you fell usefull
    Attached Files Attached Files

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 502
    Join Date
    2008-11-05
    Posts
    1,025


    Default Re: GSM BSS Network KPI (RxQuality) Optimization Manual

    Quote Originally Posted by koepret View Post

    GSM BSS Network KPI (RxQuality) Optimization Manual

    Contents
    1 Basic Principle
    1.1 Definition
    1.2 Theory Introduction
    1.3 Recommended Formula
    1.4 Signaling Procedure and Statistical Point
    2 Influencing Factors
    3 Analysis Process and Optimization Methods
    3.1 Analysis Process
    3.1.1 Procedures for RxQuality Problem Location
    3.2 RxQuality Optimization Methods
    3.2.1 Poor RxQuality on Entire Network
    3.2.2 Passive Intermodulation
    3.2.3 Intra-Network Interference
    3.2.4 Inter-Network Interference
    3.2.5 Hardware Fault
    3.2.6 Huawei Anti-Interference Technology
    3.2.7 Test Tool and Recommendations
    3.2.8 Recommendations for Configuration and Test
    4 RxQuality Optimization Cases
    4.1 Low RxQuality in Kenya
    4.2 Enabling Idle Burst Causing Interference Increase and Low RxQuality
    5 Information Feedback
    5.1 TEMS Test Log of Faulty Cell
    5.2 Requirements for Existing Network Configuration Data and Traffic Measurement


    without pass , enjoy it

    Koepret
    ==================
    Please Kindly add thanks and my reputation , if you fell usefull

    Dear

    Thanks for your nice Doc i saw in one doc huawei Feature call UISS do you have any document about it as the updated Huawei interference is EICC.

    BR
    RF engineer

  4. #3
    VIP Member Reputation: 1625
    Join Date
    2008-08-14
    Location
    RF Class ...
    Posts
    541


    Default Re: GSM BSS Network KPI (RxQuality) Optimization Manual

    Quote Originally Posted by RF engineer View Post
    Dear

    Thanks for your nice Doc i saw in one doc huawei Feature call UISS do you have any document about it as the updated Huawei interference is EICC.

    BR
    i am not promise , but i am try to find it

  5. #4
    Senior Member Reputation: 502
    Join Date
    2008-11-05
    Posts
    1,025


    Default Re: GSM BSS Network KPI (RxQuality) Optimization Manual

    Quote Originally Posted by koepret View Post
    i am not promise , but i am try to find it

    Thank you dear

    BR
    RF engineer

  6. #5
    Member Reputation: 141
    Join Date
    2011-02-25
    Posts
    104


    Default Re: GSM BSS Network KPI (RxQuality) Optimization Manual

    Thanks for sharing. It is a useful document.

  7. #6
    Member Reputation: 322
    Join Date
    2011-05-18
    Posts
    241


    Default Re: GSM BSS Network KPI (RxQuality) Optimization Manual

    Hey was just going through the document and found this feature about enabling Idle Bursts....can anyone eloborate on this feature I mean what does it actually signify and whats the exact parameter for this function. Thanks

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •