-
Senior Member
Reputation: 491
High TCP utilization
Dears,
what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade
-
2020-05-14 09:15 AM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1070
1 out of 1 members found this post helpful.
Re: High TCP utilization
dear
try to activate below features
1- DPCH Power Control Based on Radio Quality
2-DPCH Maximum Power Restriction
also can decrease the Power Margin thd,try to balance traffic between layers......,
Originally Posted by
justdream
Dears,
what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade
-
Post Thanks - 1 Thanks
-
Re: High TCP utilization
Originally Posted by
justdream
Dears,
what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade
Reduce default value for common control channels (BCH,SCH, PCH,... )
B
R
-
Post Thanks - 1 Thanks
-
VIP Member
Reputation: 1070
Re: High TCP utilization
dear
changing the common channel power can impact the Handover SR,thanks
Originally Posted by
electron
Reduce default value for common control channels (BCH,SCH, PCH,... )
B
R
-
Re: High TCP utilization
Originally Posted by
mounir34
dear
changing the common channel power can impact the Handover SR,thanks
Hi,
It does not impact Handover , there might be risk of loosing indoor coverage and network to network it may vary depending to site to site distance and the frequency band. Implementing in 4 different networks the gain everywhere (all type of cluster) was more than side effect .Moreover due to spectrum curving for higher technologies these days in the world it is unavoidable to bear with some disadvantage before WCDMA sunset
B
R
-
VIP Member
Reputation: 1070
Re: High TCP utilization
i change it also in my network and badly impacted the HO and recovered after rollback the BCH Power to default value ,thanks
Originally Posted by
electron
Hi,
It does not impact Handover , there might be risk of loosing indoor coverage and network to network it may vary depending to site to site distance and the frequency band. Implementing in 4 different networks the gain everywhere (all type of cluster) was more than side effect .Moreover due to spectrum curving for higher technologies these days in the world it is unavoidable to bear with some disadvantage before WCDMA sunset
B
R
Last edited by mounir34; 2020-05-19 at 03:47 AM
-
Post Thanks - 1 Thanks
-
Re: High TCP utilization
Originally Posted by
mounir34
i change it also in my network and badly impacted the HO and recovered after rollback the BCH Power to default value ,thanks
It depend how much you reduced it . Tell me your pre and post value relative to P-CPICH
Bookmarks