-
Junior Member
Reputation: 12
-
2022-11-07 04:01 AM
# ADS
Circuit advertisement
-
Member
Reputation: 129
Re: Upgrading STP 8040
Hi,
You have to use newer RM2 too.
-
Post Thanks - 2 Thanks
-
Member
Reputation: 209
Re: Upgrading STP 8040
I have tested the RM2.19 version and it has SC-series support (later versions too).
-
Post Thanks - 2 Thanks
-
Junior Member
Reputation: 13
1 out of 1 members found this post helpful.
Re: Upgrading STP 8040
Originally Posted by
SC2024
Another question : Is my RM too old to program newer SC series ?
Thanks in advance.
CompatibilityRadio Manager R2.8.40.1
supports the following Radios and Software:
SRP2000, SRH3500, SRH3800, SRH3900, STP8000, STP8100, STP8200, STP8X100, STP8X000, STP9000, STP9100, STP9200
SRC3300
SRM2000, SRM3500, SRG2000, SRG3500, SRG3900Radio Board SRB8000, SRB9000
Version 7 V7.2
Version 8 V8.0, V8.1, V8.3, V8.6, V8.8
Version 9 V9.0, V9.1, V9.2, V9.5, V9.6, V9.7
Version 10 V10.0, V10.2, V10.5, V10.6, V10.7, 10.8, V10.9, V10.11, V10.12, V10.13, V10.14
-
Post Thanks - 2 Thanks
-
Junior Member
Reputation: 13
Re: Upgrading STP 8040
Originally Posted by
SC2024
Hi guys !
Hope someone will be able to answer my questions
So I have RM 2.8.40.1 and I wanted to upgrade my STP. I managed to upgrade it from 1678 021 02937 to 1711 039 02937 but I can't upgrade it more, even with more recent software in my RM. Do you guys know what could be the problem ?
What version is software 1711 039 02937?
Not sure if you also need SALT license for STP8000 Series in order to upgrade software inside the radio.
-
Re: Upgrading STP 8040
1711 039 02937 is version 10.14-026 and should be flashed to STP8040 using RM 2.8.40.1
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 12
Re: Upgrading STP 8040
Thanks for the answers guys !
Understood, so my RM can support software up to 10.14, and is unfortunately too old to program the newer SC series.
Thanks again.
-
Junior Member
Reputation: 12
1 out of 1 members found this post helpful.
Re: Upgrading STP 8040
Originally Posted by
RMW00
What version is software
1711 039 02937?
Not sure if you also need SALT license for STP8000 Series in order to upgrade software inside the radio.
AFAIK you don’t need the SALT licence to upgrade a radio, except if it has v10.26 or SC3.1 software, which newer radio has.
-
Member
Reputation: 209
1 out of 1 members found this post helpful.
Re: Upgrading STP 8040
You need SALT-1 licence:
for STP and SRG from Software-Version 10.20 (and for SRH-3900 too) and for SC-series from SC1.6
Order number from Sepura is 600-00365, price was 50Euro+VAT / terminal
You need SALT-2 licence:
for SRG3900 and STP-series upgrade to Software V10.24 and SC-series upgrade to Software SC2.0
Order number from Sepura is 600-00378, price was 50Euro+VAT / terminal
You need SALT-3 licence:
for SRG3900 and STP-series upgrade to Software V10.26 and SC-series upgrade to Software SC3.1
Order number from Sepura is 600-00383, price was 70Euro+VAT / terminal
-
Post Thanks - 2 Thanks
-
Junior Member
Reputation: 10
Re: Upgrading STP 8040
I am looking for a firmware for my STP 8000 (current main software was until recently 176000602937) now it is on 00000000 how can I get it restored please help
thank you
Bookmarks