Thanks Thanks:  14
Page 1 of 2 12 LastLast
Showing results 1 to 10 of 17

Thread: Sepura Programming Software 2000-3000 Series

  1. #1
    Member Reputation: 33
    Join Date
    2014-08-11
    Posts
    47


    1 out of 1 members found this post helpful.

    Default Sepura Programming Software 2000-3000 Series

    Instructions:

    Tetra programmer passwords and start up

    When installing the programmer;

    1. Ensure that any existing Sepura Tetra programmer is removed before proceeding to install any new TETRA programmer. (Note this is no longer necessary from v4. – the install process allows you to choose an installation directory.)

    2. When asked for a password enter: - New1User - exactly as written and it is case sensitive.

    3. Serial number can be any number. (suggestion: use the programmer version number and your own name)

    4. Start programmer

    5. Running the program for the first time you will be asked for a user name and password.

    User name = root

    Password = Add06Wes

    Again they are case sensitive

    6. Set the highest COM port speed that your PC supports (ok if R is
    displayed)

    7. after close program, will ask for new user name and password to be setup.


    please leave rep points and thanks Enjoy!!
    Attached Files Attached Files

  2. Thanks johnF, jhocker, Johnfox thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Junior Member Reputation: 12
    Join Date
    2013-02-25
    Posts
    29


    Default Re: Sepura Programming Software 2000-3000 Series

    Hi, and tnx for the info.

    It seems that i am too low on rep point´s to open your link. Is there any other way the newbie could get this file?

    regards.

    Johannes

  5. #3
    Member Reputation: 33
    Join Date
    2014-08-11
    Posts
    47


    Default Re: Sepura Programming Software 2000-3000 Series

    Send me private message with email address not a Gmail one as wont allow me to send .exe files in a zip file , may take a while to get a reply as extremely busy this week.

  6. Thanks johnF thanked for this post
  7. #4
    Member Reputation: 28
    Join Date
    2014-03-25
    Posts
    86


    Default Re: Sepura Programming Software 2000-3000 Series

    Latest Version....

    Same instructions for using like older versions... (NewUser1...) :-)
    Last edited by bytehunter73; 2014-09-20 at 01:31 AM

  8. Thanks jhocker thanked for this post
  9. #5
    Junior Member Reputation: 10
    Join Date
    2015-08-02
    Posts
    1


    Default Re: Sepura Programming Software 2000-3000 Series

    hi,
    Any other way to download this file ?

    i have already register, but doesnt let me download :-(

    John
    Quote Originally Posted by ********trbo View Post
    Instructions:

    Tetra programmer passwords and start up

    When installing the programmer;

    1. Ensure that any existing Sepura Tetra programmer is removed before proceeding to install any new TETRA programmer. (Note this is no longer necessary from v4. – the install process allows you to choose an installation directory.)

    2. When asked for a password enter: - New1User - exactly as written and it is case sensitive.

    3. Serial number can be any number. (suggestion: use the programmer version number and your own name)

    4. Start programmer

    5. Running the program for the first time you will be asked for a user name and password.

    User name = root

    Password = Add06Wes

    Again they are case sensitive

    6. Set the highest COM port speed that your PC supports (ok if R is
    displayed)

    7. after close program, will ask for new user name and password to be setup.


    please leave rep points and thanks Enjoy!!

  10. #6
    Member Reputation: 130
    Join Date
    2010-08-22
    Location
    EMEA
    Posts
    222


    Default Re: Sepura Programming Software 2000-3000 Series

    Welcome,

    To answer your question: Yes, Be more active, get more rep by participating and sharing stuff for example.

  11. Thanks bytehunter73 thanked for this post
  12. #7
    Junior Member Reputation: 10
    Join Date
    2016-02-11
    Posts
    2


    Default Re: Sepura Programming Software 2000-3000 Series

    I'd like to download a Radio Manager 2. Does anyone know where to get this??

  13. #8
    Member Reputation: 211
    Join Date
    2014-03-09
    Location
    Hungary
    Posts
    521


    Default Re: Sepura Programming Software 2000-3000 Series

    Serial Manager comes within the hwid your computer and is unique, can not be used with any other that does not work.
    You can download it - hopefully, but only work with specific code generated by Sepura factory to your personal computer.

  14. #9
    Junior Member Reputation: 10
    Join Date
    2016-02-11
    Posts
    2


    Default Re: Sepura Programming Software 2000-3000 Series

    Quote Originally Posted by 580-Gabor View Post
    Serial Manager comes within the hwid your computer and is unique, can not be used with any other that does not work.
    You can download it - hopefully, but only work with specific code generated by Sepura factory to your personal computer.
    Then we are doomed. We got about 15 srh3500 for our tactical force but no program or programming cable. I managed to get a programming cable but we still don't have the program. The radios were bought by another force and given to us, however they kept the cables and programs for themselves and now the contract is over. Things that happen only in Brazil. We have these radios but half of them just can't be used. For these radios I think Radio Manager 1 would work too but I couldn't find it either. Didn't know about the hwid. We've tried about everything, really don't know what to do anymore...

  15. #10
    Member Reputation: 28
    Join Date
    2014-03-25
    Posts
    86


    Default Re: Sepura Programming Software 2000-3000 Series

    Hi!

    Sepura sells the Radio Manager 2 in a LITE Version for about 1000 Euro. For some HRT too expensive. Search for a dealer, who can programm the radios. It´s the easiest way for you.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •