-
What is the maximum number SDCCHs that can be defined per TRX
Hi,
I have a problem with defining more than 2 SDCCHs on 1 TRX or channell group0. Anytime I increase to 3 or 4 some timeslots get blocked. It is an E******* system and the BSC level parameter MAXNOSDCCHTRX is set to 4. CONFACT is set to 4 for the cells, NUMREQEGPRSBPC is set 2 for the cells. Any idea why I am not able to define more than 2SDCCHs on 1 TRX?
Thank,
-
2011-12-14 01:46 AM
# ADS
Circuit advertisement
-
Member
Reputation: 270
Re: What is the maximum number SDCCHs that can be defined per TRX
The maximum number of sdcch that you can define on a trx also deopends on your LAPD capacity check the lapd capacity the blocking may be there from there for your case as more than 2 sd then LAPD should be 64 KB LAPD.
If you think this has been useful adding to the Reputation is appreciated
Default Pass: Nsn@12345678
-
Member
Reputation: 167
Re: What is the maximum number SDCCHs that can be defined per TRX
hi there,
IMPORTANT:the "thumb-rule" says that 1 SD is to be defined each 2 TRx.
having 1 TRx per cell, it means 8 TS only. consider that 1 TS is default for paging and 1 you need to set as SD... in this case you have 6 TS for traffic... not considering GPRS/EDGE data...
in your case, by setting the number of SD to 3 or 4, it means you leave 3-4 TS for traffic. as far as know it is not possible to set the way you want, since the LOAD on the signaling link would too high to bear.
i do not know E******* param, but in Nokia there is such a thing as LOAD that has to be set.
cheers.
david
P.S.
if you like it, plz give some rep
-
Post Thanks - 1 Thanks
manal thanked for this post
-
Member
Reputation: 163
Re: What is the maximum number SDCCHs that can be defined per TRX
As per thumb rule
Max number of Time slots in 1 trx=2
Max number of Time slots in 1 Sector=32.
-
Member
Reputation: 44
Re: What is the maximum number SDCCHs that can be defined per TRX
In the past I have allocated an entire TRX(apart from the BCCH timeslot) to SDCCH. This was on a special event site and it worked very well.
-
BannedUser-MultiAccounts
Reputation: 155
Re: What is the maximum number SDCCHs that can be defined per TRX
Hi Jan74
Were you using flex-abis in this case or normal abis without LAPD concentration?
Originally Posted by
jan74
In the past I have allocated an entire TRX(apart from the BCCH timeslot) to SDCCH. This was on a special event site and it worked very well.
-
Member
Reputation: 167
Re: What is the maximum number SDCCHs that can be defined per TRX
Originally Posted by
jitendracellplan
As per thumb rule
Max number of Time slots in 1 trx=2
Max number of Time slots in 1 Sector=32.
1 TRx has always 8 TS!!!!
according to this, the second affirmation, one cell cannot have more than 4TRx!!!!
we have cells in the network with 7-8 TRx!!! i managed one network with 12TRx per cell!!!
check your data please.
thx.
david
-
Member
Reputation: 167
Re: What is the maximum number SDCCHs that can be defined per TRX
Originally Posted by
jan74
In the past I have allocated an entire TRX(apart from the BCCH timeslot) to SDCCH. This was on a special event site and it worked very well.
it is a great waste of resources... you say "entire TRx"... of how many???!?!?!
if just one TRx present, it is not possible mate...
-
Member
Reputation: 74
Re: What is the maximum number SDCCHs that can be defined per TRX
Hi
for E******* number of SDCCH on the TRX is defined by the license.
BR
-
Junior Member
Reputation: 14
Re: What is the maximum number SDCCHs that can be defined per TRX
search about (increase sdcch capacity ) it AXEPARS or exchange property and change it
Bookmarks