Actix_Query_Training_for_GSM

[Alvaro]

Here is the good document which speaks about how to use query with actix
pls, add my Reputation.
for Password, there is no password .

http://rapidshare.com/files/37315722...r_GSM.rar.html

Enjoy.

[striker]

Here is the good document which speaks about how to use query with actix
pls, add my Reputation.
for Password, there is no password .

http://rapidshare.com/files/37315722...r_GSM.rar.html

Enjoy.

could someone upload it again?link is already downloaded ten times

[simmus0300]

Here is the good document which speaks about how to use query with actix
pls, add my Reputation.
for Password, there is no password .

http://rapidshare.com/files/37315722...r_GSM.rar.html

Enjoy.

link is already downloaded ten times

[Alvaro]

Hi

here is another link :

ttp://rapidshare.com/files/373329374...r_GSM.rar.html

il you like it add rep

Enjoy

[chiku]

1)Can anybody help me with following Reporting? how can i add query to my GSM voice Template and Generate following KPI report??

2) what is PDF/CDF chart ???how can i generate with actix??
----------------------------------------------------------------------
Below is customer requirement


1. Binning

Customer recommends spatial binning of 20m for post processing the data which can be set in Actix Analyzer.
For example:
a) Depending on the car speed 30mph to 65 mph; we may have at least 2 to 4 samples per bin assuming scanner takes one measurement per second. But I am assuming scanner sampling is much faster than 1 sec.
b) For Rx Lev, 4 measurements for particular -76,-84,-79, -81; therefore the average is -80dBm

2. Drive Test setup: Every test includes mobility test

1) Long Call
Duration: 210 sec ; Idle time = 10sec ( Drives KPI: Drop call Rate. Handover Success Rate, Rx Qual )

2) Short Call
Duration: 45 sec ; Idle time = 15 sec (Drives KPI :Network Access Failure Rate,)

3) Packet call
File Size: 3MB FTP download ;(Drives KPI: Average RLC Throughput, Data Accessibility, Data Retainability)

3. Cluster Reports: Costomer also recommends to include following in the cluster reports
Summary KPI results per with entire data set and filtered data (i.e removed data points with Rx Lev <-98dBm)
downlink Rx lev plot (with PDF/CDF charts)
downlink Rx Qual plot (with PDF/CDF charts)
RLC Throughput plot (with PDF/CDF charts)
C/I plot (with PDF/CDF charts)

[Rooster[BG]]

2. - PDF is probability, CDF is comulative.
Example - 5 ranges of RxLev - each range is PDF, Comulative is sum of ranges
Range PDF, % CDF %
Range 1 10 10
Range 2 15 25
Range 3 30 55
Range 4 40 95
Range 5 10 100

Customer RQ:

Long call:
Drop Call Rate - Dropped calls divided to the sum of all successful Setups
HO SSR - HO OK / All HO Commands
RxQual - Actix Parameter, you can define own ranges in the map window

Short Call:
Successful Call Setups / All Call Setup Attempts

Packet Call:

Avg RLC Throughput - actix parameter
Data Accessibility - Successful Attach / PDP Context Activation / Session Start (depends on RQ, but probably mean PDP Context Activation )
Successful PDPs / All PDP Context Activation attempts
Data Retain ability - Session failures


The best way to do the report is to create Actix workbook with the required parameters to make the charts and export the plot from Actix's Map Window

1)Can anybody help me with following Reporting? how can i add query to my GSM voice Template and Generate following KPI report??

2) what is PDF/CDF chart ???how can i generate with actix??
----------------------------------------------------------------------
Below is customer requirement


1. Binning

Customer recommends spatial binning of 20m for post processing the data which can be set in Actix Analyzer.
For example:
a) Depending on the car speed 30mph to 65 mph; we may have at least 2 to 4 samples per bin assuming scanner takes one measurement per second. But I am assuming scanner sampling is much faster than 1 sec.
b) For Rx Lev, 4 measurements for particular -76,-84,-79, -81; therefore the average is -80dBm

2. Drive Test setup: Every test includes mobility test

1) Long Call
Duration: 210 sec ; Idle time = 10sec ( Drives KPI: Drop call Rate. Handover Success Rate, Rx Qual )

2) Short Call
Duration: 45 sec ; Idle time = 15 sec (Drives KPI :Network Access Failure Rate,)

3) Packet call
File Size: 3MB FTP download ;(Drives KPI: Average RLC Throughput, Data Accessibility, Data Retainability)

3. Cluster Reports: Costomer also recommends to include following in the cluster reports
Summary KPI results per with entire data set and filtered data (i.e removed data points with Rx Lev <-98dBm)
downlink Rx lev plot (with PDF/CDF charts)
downlink Rx Qual plot (with PDF/CDF charts)
RLC Throughput plot (with PDF/CDF charts)
C/I plot (with PDF/CDF charts)

[ncinta]

Hi

here is another link :

ttp://rapidshare.com/files/373329374...r_GSM.rar.html

il you like it add rep

Enjoy

This link is also dead.
http://rapidshare.com/files/37332937...r_GSM.rar.html

Please re-upload in a better place!!!!!

[mrdiamond]

thanks....good work

[marceloenrique]

This link is also dead.
http://rapidshare.com/files/37332937...r_GSM.rar.html

Please re-upload in a better place!!!!!

link death

please reload

gracias

marceloenrique

[islam wagih]

Here is the good document which speaks about how to use query with actix
pls, add my Reputation.
for Password, there is no password .

http://rapidshare.com/files/37315722...r_GSM.rar.html

Enjoy.

Link is dead, please reupload

BR