-
Member
Reputation: 85
Actix_Query_Training_for_GSM
Here is the good document which speaks about how to use query with actix
pls, add my Reputation.
for Password, there is no password .
http://rapidshare.com/files/37315722...r_GSM.rar.html
Enjoy.
-
2010-04-08 04:11 AM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1019
Originally Posted by
Alvaro
could someone upload it again?link is already downloaded ten times
-
Originally Posted by
Alvaro
link is already downloaded ten times
-
Member
Reputation: 85
Axtix Query Training
Hi
here is another link :
ttp://rapidshare.com/files/373329374...r_GSM.rar.html
il you like it add rep
Enjoy
-
Member
Reputation: 49
Actix Query and KPI help needed
1)Can anybody help me with following Reporting? how can i add query to my GSM voice Template and Generate following KPI report??
2) what is PDF/CDF chart ???how can i generate with actix??
----------------------------------------------------------------------
Below is customer requirement
1. Binning
Customer recommends spatial binning of 20m for post processing the data which can be set in Actix Analyzer.
For example:
a) Depending on the car speed 30mph to 65 mph; we may have at least 2 to 4 samples per bin assuming scanner takes one measurement per second. But I am assuming scanner sampling is much faster than 1 sec.
b) For Rx Lev, 4 measurements for particular -76,-84,-79, -81; therefore the average is -80dBm
2. Drive Test setup: Every test includes mobility test
1) Long Call
Duration: 210 sec ; Idle time = 10sec ( Drives KPI: Drop call Rate. Handover Success Rate, Rx Qual )
2) Short Call
Duration: 45 sec ; Idle time = 15 sec (Drives KPI :Network Access Failure Rate,)
3) Packet call
File Size: 3MB FTP download ;(Drives KPI: Average RLC Throughput, Data Accessibility, Data Retainability)
3. Cluster Reports: Costomer also recommends to include following in the cluster reports
Summary KPI results per with entire data set and filtered data (i.e removed data points with Rx Lev <-98dBm)
downlink Rx lev plot (with PDF/CDF charts)
downlink Rx Qual plot (with PDF/CDF charts)
RLC Throughput plot (with PDF/CDF charts)
C/I plot (with PDF/CDF charts)
-
2. - PDF is probability, CDF is comulative.
Example - 5 ranges of RxLev - each range is PDF, Comulative is sum of ranges
Range PDF, % CDF %
Range 1 10 10
Range 2 15 25
Range 3 30 55
Range 4 40 95
Range 5 10 100
Customer RQ:
Long call:
Drop Call Rate - Dropped calls divided to the sum of all successful Setups
HO SSR - HO OK / All HO Commands
RxQual - Actix Parameter, you can define own ranges in the map window
Short Call:
Successful Call Setups / All Call Setup Attempts
Packet Call:
Avg RLC Throughput - actix parameter
Data Accessibility - Successful Attach / PDP Context Activation / Session Start (depends on RQ, but probably mean PDP Context Activation )
Successful PDPs / All PDP Context Activation attempts
Data Retain ability - Session failures
The best way to do the report is to create Actix workbook with the required parameters to make the charts and export the plot from Actix's Map Window
Originally Posted by
chiku
1)Can anybody help me with following Reporting? how can i add query to my GSM voice Template and Generate following KPI report??
2) what is PDF/CDF chart ???how can i generate with actix??
----------------------------------------------------------------------
Below is customer requirement
1. Binning
Customer recommends spatial binning of 20m for post processing the data which can be set in Actix Analyzer.
For example:
a) Depending on the car speed 30mph to 65 mph; we may have at least 2 to 4 samples per bin assuming scanner takes one measurement per second. But I am assuming scanner sampling is much faster than 1 sec.
b) For Rx Lev, 4 measurements for particular -76,-84,-79, -81; therefore the average is -80dBm
2. Drive Test setup: Every test includes mobility test
1) Long Call
Duration: 210 sec ; Idle time = 10sec ( Drives KPI: Drop call Rate. Handover Success Rate, Rx Qual )
2) Short Call
Duration: 45 sec ; Idle time = 15 sec (Drives KPI :Network Access Failure Rate,)
3) Packet call
File Size: 3MB FTP download ;(Drives KPI: Average RLC Throughput, Data Accessibility, Data Retainability)
3. Cluster Reports: Costomer also recommends to include following in the cluster reports
Summary KPI results per with entire data set and filtered data (i.e removed data points with Rx Lev <-98dBm)
downlink Rx lev plot (with PDF/CDF charts)
downlink Rx Qual plot (with PDF/CDF charts)
RLC Throughput plot (with PDF/CDF charts)
C/I plot (with PDF/CDF charts)
-
Link
Originally Posted by
Alvaro
This link is also dead.
http://rapidshare.com/files/37332937...r_GSM.rar.html
Please re-upload in a better place!!!!!
-
-
VIP Member
Reputation: 711
Originally Posted by
ncinta
link death
please reload
gracias
marceloenrique
-
PLZ Reupload
Originally Posted by
Alvaro
Link is dead, please reupload
BR
Bookmarks