Multikey 0.18.0.3 x32 and x64

[Shiela]

I know this is old but this is the last version of Multikey
that support for x64 machine. Support Windows 7. Enjoice.
How to install it?

For x32(This step for Windows XP and Windows 7)

1. Run install.cmd from Multikey32 folder.
2. Restart your PC.
3. Install your reg file.
4. Restart emulator using restart.cmd from Multikey32 folder.

For x64(This step only for Windows 7 x64)

1. Disable UAC and run Driver Signature Enforcement Overrider 1.3b with the Administrator rights.
2. Download it here.
3. Run install.cmd from Multikey64 folder.
4. Restart your PC.
5. Install your reg file.
6. Restart emulator using restart.cmd from Multikey64 folder.

How to know whether Multikey is installed successfully?

1. Check at the Device Manager under System Devices.
2. For Windows 7, can be checked at Devices And Printers.
3. If the right reg file is installed, there will be an installing device notification at the notification area.
4. If still not working, restart your PC. If still having problem, check again your reg file.

Tested and working on my PC. PM me for password.

[anwar]

MultiKey 18.2 Work at XP and W7

Here

and

Here

Newer version, password already distributed...

[Shiela]

@anwar
You will not realise it will not work on x64 machine untill you test it.
Newer version only works for x32 machine.
Another thing newer version of Multikey was packed with VM protection and it will decrease the processing time of the software.
Try it if you don' believe me.
Want solution for x64 for newer version? Contact elite.r at c r a c k lab.ru and pay some amount of money.

[kohck]

Hi Shiela,

could you please give me the password for Multikey? the zip file is password protected...