I have installed Tems_investigation_9.0.3 in my laptop(AMD Athlon X2). I am using Sony E******* K800i as MS for GSM drive test. I also installed driver for K800i. First I open Tems_investigation_9.0.3 then I connect K800i and GPS Nokia LD-3W. It shows both MS and GPS are prperly connected.I get GPS co-ordinate properly but I do not get any values like ARFCN,recieve signal values. Can any one help me?
I have installed Tems_investigation_9.0.3 in my laptop(AMD Athlon X2). I am using Sony E******* K800i as MS for GSM drive test. I also installed driver for K800i. First I open Tems_investigation_9.0.3 then I connect K800i and GPS Nokia LD-3W. It shows both MS and GPS are prperly connected.I get GPS co-ordinate properly but I do not get any values like ARFCN,recieve signal values. Can any one help me?
First : Make sure the band serving ( GSM or 3G )
next go to window TI, If GSM hit presentation next select gsm next select ( what you want to see ) ,(example GSM GSM Serving + Neighbors ) select GSM Serving + Neighbors and in GSM GSM Serving + Neighbors window , press the right mouse button select properties next select Mobile port/number ( example MS1 or MS2 or MS3 see equipment config )
press apply and ok..... enjoy
Bookmarks