Need Help form Actix Expert

**yousuf144** · 2010-01-19, 05:55 AM

This link contains a zip file. The Zip file consists of log file collected by agilent 11.3. I have tried to plot it on Actix. It does not plot properly. It is scattering. If any1 know what the issue is please let me know. Many Thanks.

http://www.sendspace.com/file/7j9fnd

**Finetopix** · 2010-01-19 05:55 AM

**cdmahn** · 2010-01-19, 11:39 AM

Hi,

It seems that you used the bluetooth GPS (or very sensitive one) to make the measurements in certain indoor places. It is normal because the accuracy of GPS is around 10m.

**yousuf144** · 2010-01-19, 12:52 PM

Hi,
I did not use any GPS. It was collected using ancor or walk point.

**davidbrayan** · 2010-01-19, 01:15 PM

since it is very small area, if you are using time binning , reduce it to lower value.
currently it may be 2000 ms , reduce it to 500 ms or lower for better resolution.
the samples are reduced due to binning.

BR
db

**yousuf144** · 2010-01-19, 03:04 PM

When I plot the file I see the turning points or ancor points(agilent). The path between is not plotted.

**davidbrayan** · 2010-01-19, 04:25 PM

attach screenshot of your display.

BR
db

Originally Posted by yousuf144

When I plot the file I see the turning points or ancor points(agilent). The path between is not plotted.

**yousuf144** · 2010-01-20, 07:57 AM

Thank you very much for the screen shot. I dont have enough permission to view it. Is there any way u can upload it to imageshare.com or some similar site.