I have some problems to plot number of active PN in Actix. Every time I plot those parameter, the result seems not continuous. And this always happened regardless what DT tools I've used. It seems like Actix only show number of active PN when handoff occured.
Does anybody ever have the same problem? And can you help me to fix it, so I can get the smooth picture when I plot number of active PN.
there're some missing points because of sometimes the PNs become 'Serving' while in call process (dedicated mode), and back to 'Active' while in idle mode.
I have some problems to plot number of active PN in Actix. Every time I plot those parameter, the result seems not continuous. And this always happened regardless what DT tools I've used. It seems like Actix only show number of active PN when handoff occured.
Does anybody ever have the same problem? And can you help me to fix it, so I can get the smooth picture when I plot number of active PN.
Regards,
Menor
If you want to make it more dot, try to change the binning become 500 or less, have problem with your customer, aren't you?
If you want to make it more dot, try to change the binning become 500 or less, have problem with your customer, aren't you?
You're right. They're insist to correct it, cause they think there's something wrong with my plot. And apparently they use log file from agilent loaded and ploted on agilent DV, which had the right plot, as comparison.
I've tried changing binning to 100. Still not much improvement.
Is it correct if I use number_of_unique_PN as replacement to the number_of_active_PN? Cause I think it shows the same thing, but with more dots in it.
You're right. They're insist to correct it, cause they think there's something wrong with my plot. And apparently they use log file from agilent loaded and ploted on agilent DV, which had the right plot, as comparison.
I've tried changing binning to 100. Still not much improvement.
Is it correct if I use number_of_unique_PN as replacement to the number_of_active_PN? Cause I think it shows the same thing, but with more dots in it.
I think your customer use number_of_active_PN to check any pilot pollution exist. i think in your actix have missing file, so try to install new version of actix and hopefully 100 binning give the more dot
1. Introduction
2. Finding the problem\isolating the problem in large amounts of data
3. Finding the problem\Reducing the quantity of parameters
4. Analysis\Visualising the problems
5. Analysis\Combining different views
6. Analysis\Isolating interference
7. Analysis\Repeated Handover Analysis
8. Analysis\Combining multiple logfiles together
9. Analysis\Embedding your expertise
10. Analysis\GPRS Service analysis
11. Analysis\Isolating problems to GPRS clients
12. Multiple Interfaces\IMSI merging with DT
13. Multiple Interfaces\Merging Abis with drivetest data
14. Multiple Interfaces\A interface analysis
15. Multiple Interfaces\A interface analysis 2
16. Reporting\Standard KPIs for drivetest
17. Reporting\Competitive benchmarking
__________________
Cheers,. wnsworld
____________________________________ ..either you work smart or work more....
Please try my default passkey wnsjay before asking
Bookmarks