-
Junior Member
Reputation: 10
-
2024-05-13 05:15 AM
# ADS
Circuit advertisement
-
Member
Reputation: 141
Re: Cleartone CM9000P
This is very old radio, you will need old pc with win7 os at least.
-
Post Thanks - 1 Thanks
-
Member
Reputation: 211
Re: Cleartone CM9000P
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 10
Re: Cleartone CM9000P
Thanks for the replies
Renengpro: I used Win 10 Pro as the software started without any problems. I'll try with a Win 7 or XP laptop.
580-Gabor: yes yes I had seen the other discussion and in fact I immediately started looking.
I have the 2.05 software working
I found 2.06 but it requires a login password.
my serial number does not match the ones you wrote, my full label:
model: CM9000P
TEI: 00000404-440046
serial: CV40046
I deduced that since it is a 4 in the number it is the 410-430 version
the backlight is green as you wrote.
I will try as written with WIN 7 or XP and hope for the best
Thanks so much, I'll keep you updated
Marco
-
Member
Reputation: 141
Re: Cleartone CM9000P
One thing that is very straightforward, you need to use simple 9 pin serial cable.
Nothing special is needed in regards to connection.
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 10
Re: Cleartone CM9000P
Good morning everyone, updates!
I managed to connect the radio to the PC but the menus are many and with unknown parameters, I'm trying but it doesn't want to go into tx
Is there some basic file that I can install with parameters already set or some programming manual?
In the meantime, one occasion brought me a Simoco SRM1000 on the table even without parameters installed, but for that I will make a new message hoping that they can communicate with each other...
Thanks and have a good Sunday
Marco
Bookmarks