Thanks Thanks:  3
Showing results 1 to 6 of 6

Thread: Mini-Link TN Password problems

  1. #1
    Junior Member Reputation: 10
    Join Date
    2022-01-13
    Posts
    1

    Default Mini-Link TN Password problems

    Hello everyone.


    I have a Mini-Link TN AMM2p B with an NPU3 B.


    My problem is that I don't have the password for control_user or admin_user.


    To my question, is there a way to do a factory reset without logging in?

    Thanks in advance

  2. Thanks victor1989 thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    VIP Member Reputation: 1852 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    574

    Default Re: Mini-Link TN Password problems

    In my mini-link PDF there were reset manual.
    but unfortunately it didn't reset if the device was a slave ((
    /carv

  5. Thanks victor1989 thanked for this post
  6. #3
    Junior Member Reputation: 10
    Join Date
    2024-05-07
    Location
    Ukraine, Kyiv
    Posts
    1

    Default Re: Mini-Link TN Password problems

    You can replace your NPU into another AMM, then you can reset configurations to factory setting

  7. Thanks victor1989 thanked for this post
  8. #4
    Junior Member Reputation: 10
    Join Date
    2020-07-05
    Posts
    1

    Default Re: Mini-Link TN Password problems

    Hello friends

    please help
    How we can check board information for RAU in TN with CLI?
    "show board 1/3.1" not working
    2024-07-31_16-46-10.jpg

  9. #5
    Junior Member Reputation: 10
    Join Date
    2018-07-23
    Posts
    4

    Default Re: Mini-Link TN Password problems

    Hi, if you are connected directly over USB port, password is still "e*******" for control_user.

  10. #6
    Junior Member Reputation: 10
    Join Date
    2024-09-24
    Posts
    1

    Default Re: Mini-Link TN Password problems


Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •