-
Member
Reputation: 21
5 out of 5 members found this post helpful.
cps 8.1 patch
Hi all. Managed to make native 'enable selling features' menu work without an error on cps 8.1.
Some likes and upvotes and I'll share
-
Post Thanks - 2 Thanks
-
2024-02-18 12:15 AM
# ADS
Circuit advertisement
-
Junior Member
Reputation: 12
1 out of 1 members found this post helpful.
Re: cps 8.1 patch
Originally Posted by
zopoloid
Hi all. Managed to make native 'enable selling features' menu work without an error on cps 8.1.
Some likes and upvotes and I'll share
Bravo! I know we have been waiting for it. Lots of people on the other thread couldnt get it to work properly.
-
Post Thanks - 2 Thanks
-
Member
Reputation: 21
Re: cps 8.1 patch
I was one of those people so I didn't drop the matter until I solved it.
Uploading soon.
-
Member
Reputation: 21
2 out of 2 members found this post helpful.
Re: cps 8.1 patch
cps81sfpatch.zip
Pass: finetopix
Copy w/overwrite to bin folder. Requires cpsplus8.1 w/deppatch.
-
Post Thanks - 1 Thanks
-
Junior Member
Reputation: 12
Re: cps 8.1 patch
Originally Posted by
zopoloid
cps81sfpatch.zip
Pass: finetopix
Copy w/overwrite to bin folder. Requires cpsplus8.1 w/deppatch.
Well done!
Sadly I was unable to download using this link.
-
Junior Member
Reputation: 12
Re: cps 8.1 patch
Originally Posted by
zopoloid
cps81sfpatch.zip
Pass: finetopix
Copy w/overwrite to bin folder. Requires cpsplus8.1 w/deppatch.
Any other way to share the file?
-
Member
Reputation: 211
Re: cps 8.1 patch
You can enable the paid functions without this patch with the depot software
Look for an unsubscribed feature with a gray background in the capabilities menu
Place the mouse cursor on it, then click on the L (lab), then the D (decimal) function on the upper left corner
Look for the following menu item:
CP_Sales_Feature_f
within this: Sale_features_data, click on it with the mouse
The table that appears contains the paid functions. Where there is 0, it is not subscribed to, if you change the value to 1, it becomes available
If you are ready with the selection, you can approve it with the L (lab) function at the top left corner.
Unfortunately, it is also possible to enable a function that does not exist for the device, in which case the device will indicate an error.
Of course, the value will have to be set to 0 again for the unsuitable function
(e.g. handheld terminals cannot be used as gateways, so this function must not be enabled)
-
Post Thanks - 1 Thanks
Bookmarks