-
Junior Member
Reputation: 11
Recover MTP3100 that lost power during firmware write
Title says it all, Radio was being updated and pc lost power. No life now just a black screen when holding power 1+9. Any ideas on how to fix this?
Looks almost like if you hit erase in the CPS.
-
2023-05-27 07:05 AM
# ADS
Circuit advertisement
-
Member
Reputation: 34
Re: Recover MTP3100 that lost power during firmware write
Originally Posted by
m6sso
O título diz tudo, o rádio estava sendo atualizado e o pc perdeu energia. Sem vida agora apenas uma tela preta ao segurar o poder 1 + 9. Alguma ideia de como consertar isso?
Parece quase como se você apertasse apagar no CPS.
Press the two side keys + Power, with the radio connected to the data cable and cps open!
-
Junior Member
Reputation: 11
Re: Recover MTP3100 that lost power during firmware write
Nope nothing changed still a black screen. on my working 3150 that doesn't seem to do anything.
-
Member
Reputation: 34
Re: Recover MTP3100 that lost power during firmware write
Originally Posted by
m6sso
Não, nada mudou ainda uma tela preta. no meu trabalho 3150 que parece não fazer nada.
I thought it was mtp 3100, no keyboard! 3150 as it has a keyboard it was supposed to work 1+9+power it was supposed to blink. Does it recognize the driver on the usb port?
-
Junior Member
Reputation: 11
Re: Recover MTP3100 that lost power during firmware write
they are both 3150 although as far as I know there is no difference between the 00 and 50 bar the keypad.
No life in the radio when either is done and not recognised when over usb. From what I have seen I need either a serial cable (or pinout as I have a voltage selectable UART dongle) and the upstart .AIS file if its not detected by usb and you cant enter the power+1+9 menu.
Unless someone can correct me on that fact.
-
Junior Member
Reputation: 11
Re: Recover MTP3100 that lost power during firmware write
Just going to bump this to see if anyone can share the upstart kernel file for the MTP3xxx series.
-
Member
Reputation: 209
Re: Recover MTP3100 that lost power during firmware write
I have UART upstart kernel files for the MTP3250 model.
-
Junior Member
Reputation: 11
Re: Recover MTP3100 that lost power during firmware write
Likely hood they would be the same? Its pretty dead at the moment so worth a try I guess if you would be so kind to send the file over to me. Just need to find the pinout of the PEI connector next for UART connections.
-
Member
Reputation: 209
1 out of 1 members found this post helpful.
Re: Recover MTP3100 that lost power during firmware write
Service manuals:
MTP 3150 BSM.pdf
https://mega.nz/file/1pMjzLYB#-S30Bp...F1LO--5_AUmaJw
MTP3000_MTP3100_BSM_EMEA_68015000841_D.pdf
https://mega.nz/file/ct0ngbxI#t1QrDK...PYbSXIdtB7RbtE
You need the RS-232 programming cable too: M0t0r0la PMKN-4127A
-
Post Thanks - 1 Thanks
m6sso thanked for this post
-
Junior Member
Reputation: 11
Re: Recover MTP3100 that lost power during firmware write
Thank you Gabor. Would you be able to send the AIS upstart file as well please. either on here or in PM. Kind regards
Bookmarks