Thanks Thanks:  3
Showing results 1 to 3 of 3

Thread: 4G and 5G MIMO measurements - what IE to use ?

  1. #1
    VIP Member Reputation: 1171
    Join Date
    2008-10-24
    Posts
    658


    1 out of 1 members found this post helpful.

    Default 4G and 5G MIMO measurements - what IE to use ?

    Hi to all,

    how to properly do a 4G and 5G MIMO drive-test measurements ?

    Which IE/Information Elements are available in different post-processing tools that show MIMO channel configuration mode was used % in DL/UL tests on the map/route ?

    Expecting to see percentage of combinations used , like 2x2, 4x4, ... were used, depending on activated features on network side, UE used, current channel quality during the test.

    Can someone add a good examples presentation document , where was used NEMO/ACTIX/TEMS Discovery/XCAP or similar , for post-processing analysis ?

    Thanks for help !
    Last edited by punto; 2022-12-10 at 06:44 PM

  2. Thanks slava121 thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    VIP Member Reputation: 1171
    Join Date
    2008-10-24
    Posts
    658


    Default Re: 4G and 5G MIMO measurements - what IE to use ?

    Thanks hungta for support

    @ all , please, could someone drop a few lines , from your experience on this topic, how to properly do this measurements and post-processing analysis ?

  5. Thanks rizki_py thanked for this post
  6. #3
    Member Reputation: 125
    Join Date
    2012-03-16
    Posts
    239


    1 out of 1 members found this post helpful.

    Default Re: 4G and 5G MIMO measurements - what IE to use ?

    Hope this will help you, from TDD
    2023-01-30_142751.jpg

  7. Thanks electron thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •