Thanks Thanks:  7
Page 1 of 2 12 LastLast
Showing results 1 to 10 of 11

Thread: Atoll Model Calibration

  1. #1
    Senior Member Reputation: 496
    Join Date
    2009-12-07
    Posts
    244


    Default Atoll Model Calibration

    Hi friends
    I faced problem with model calibration in atoll by DT data. calibration is done but atoll considered a big loss for different clutter classes so the output of calibration is not acceptable. after calibration max coverage is only 300m! I double checked the DT data and that is correct. is there any parameter that I should define or consider before calibration? all steps done based on atoll guide. I used Atoll ver. 3.3.2.11 with med.
    any help would be appreciated.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    VIP Member Reputation: 1933
    Join Date
    2016-10-22
    Location
    RAS
    Posts
    911


    1 out of 1 members found this post helpful.

    Default Re: Atoll Model Calibration

    HI!
    What technology did you test TD? What frequency is used for your technology? What distribution model did you calibrate?
    BR Slava

  4. Thanks mahdi thanked for this post
  5. #3
    Senior Member Reputation: 496
    Join Date
    2009-12-07
    Posts
    244


    Default Re: Atoll Model Calibration

    Thanks for your reply
    I'm trying to calibrate model for LTE B7 using SPM.

  6. #4
    VIP Member Reputation: 1933
    Join Date
    2016-10-22
    Location
    RAS
    Posts
    911


    1 out of 1 members found this post helpful.

    Default Re: Atoll Model Calibration

    Ok. Look at the mail.
    BR Slava

  7. #5
    Senior Member Reputation: 498
    Join Date
    2019-04-04
    Location
    War
    Posts
    513


    Default Re: Atoll Model Calibration

    Quote Originally Posted by mahdi View Post
    Hi friends
    I faced problem with model calibration in atoll by DT data. calibration is done but atoll considered a big loss for different clutter classes so the output of calibration is not acceptable. after calibration max coverage is only 300m! I double checked the DT data and that is correct. is there any parameter that I should define or consider before calibration? all steps done based on atoll guide. I used Atoll ver. 3.3.2.11 with med.
    any help would be appreciated.
    What resolution of map you use?

  8. #6
    Senior Member Reputation: 496
    Join Date
    2009-12-07
    Posts
    244


    1 out of 1 members found this post helpful.

    Default Re: Atoll Model Calibration

    Quote Originally Posted by macro View Post
    What resolution of map you use?

    the resolution is 20m

  9. #7
    Senior Member Reputation: 498
    Join Date
    2019-04-04
    Location
    War
    Posts
    513


    Default Re: Atoll Model Calibration

    Quote Originally Posted by mahdi View Post
    the resolution is 20m
    I think because of high resolution you have a problem, because via calibration for example two different points of CW (different by clutters in real life) lie in the same clutter on map

  10. Thanks mahdi thanked for this post
  11. #8
    Member Reputation: 94
    Join Date
    2013-03-25
    Posts
    69


    Default Re: Atoll Model Calibration

    Assuming that you have a drivetest with RSRP, did you extract the CW from the DT and calibrate after with that? If I remember well the manual was not very explicit how to do some steps.
    Some people calibrate the model tunning directly with the imported DT as a CW. It will give you a completely different thing.

  12. #9
    VIP Member Reputation: 1933
    Join Date
    2016-10-22
    Location
    RAS
    Posts
    911


    2 out of 2 members found this post helpful.

    Default Re: Atoll Model Calibration

    In Atoll-3-3-2-Model-Calibration-Guide (you can download the manual here: ) the procedure for calibrating the propagation model is described in sufficient detail. But, in reality, after calibrating the model and performing a coverage calculation, there is a noticeable difference between the real DT measurements and the calculated ones. I was unable to match.
    Last edited by slava121; 2022-07-12 at 02:13 PM
    BR Slava

  13. Thanks dmitry28, zeuscane, mahdi, liana, shak33 thanked for this post
  14. #10
    Senior Member Reputation: 496
    Join Date
    2009-12-07
    Posts
    244


    Default Re: Atoll Model Calibration

    Quote Originally Posted by slava121 View Post
    In Atoll-3-3-2-Model-Calibration-Guide (you can download the manual here: ) the procedure for calibrating the propagation model is described in sufficient detail. But, in reality, after calibrating the model and performing a coverage calculation, there is a noticeable difference between the real DT measurements and the calculated ones. I was unable to match.
    Thanks for all comments specially my friend @salva121
    I found the problem. it was because of main project file. when I imported all sites in new project everything work fine.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •