Sepura SRG3900 GPS LIP On PEI Help

[TheJoker187]

Hello friends, I need to configure my srg3900 ad GPS LIP destination for other sepura radios, What I should set in RM to accomplish that ? Once I have routed the messages on the PEI one what set of AT commands I have to use the see the gps locations sent by the other radios to the srg3900 ?
A full set of AT commands for this radio will be very much appreciated.

Thanks a lot to everyone will join

[580-Gabor]

Hi there,

please check this thread:
https://www.finetopix.com/showthread...EI-AT-Commands

(and this too: https://www.finetopix.com/showthread...nds-collection )

[TheJoker187]

Hello,

so from what I read I have to use the "AT+CTSP=2,3,10" in order to properly route the data on the PEI port but I did not understand what will happen after, every GPS LIP report will be printed on the serial port automatically ? Or I have to ask the radio to print those report ,each 20 seconds fo example, with another AT command ?

Thanks a lot for your help !