-
Member
Reputation: 21
RET E*****: link RET to cell name
Hi colleagues,
I am trying to link RET info with the cell name for E*** LTE cm exports.
In the MO RetSubUnit and parameter electricalAntennaTilt (RetSubUnit.electricalAntennaTilt) you can find the electrical tilt. But no info about the cell name is included in this MO.
Neither I've been able to find any key to correlate this MO with any other to find and link the cell name.
Any help?
Appreciated.
-
Post Thanks - 1 Thanks
-
2021-12-01 09:28 PM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 1312
Re: RET E*****: link RET to cell name
in ENM cli:
cmedit get xxxx RetSubUnit.(electricalAntennaTilt,maxTilt,minTilt,operationalState,userLabel) -t
xxxx - eNodeB name in your network
on the eNodeB command shell:
xxxx> hget RetSubUnit=1 operationalState|electricalAntennaTilt|mintilt|maxtilt|userLabel
Originally Posted by
dannthemann
Hi colleagues,
I am trying to link RET info with the cell name for E*** LTE cm exports.
In the MO RetSubUnit and parameter electricalAntennaTilt (RetSubUnit.electricalAntennaTilt) you can find the electrical tilt. But no info about the cell name is included in this MO.
Neither I've been able to find any key to correlate this MO with any other to find and link the cell name.
Any help?
Appreciated.
-
Post Thanks - 1 Thanks
-
Member
Reputation: 194
Re: RET E*****: link RET to cell name
[QUOTE=kvf;283283]in ENM cli:
cmedit get xxxx RetSubUnit.(electricalAntennaTilt,maxTilt,minTilt,operationalState,userLabel,iuantSectorId) -t
For AISG RETs during the initial setup installer has to specify the sector in the iuantSectorId.
BR
-
Post Thanks - 1 Thanks
Bookmarks