Thanks Thanks:  0
Showing results 1 to 2 of 2

Thread: MTM800E no audio output

  1. #1
    Junior Member Reputation: 10
    Join Date
    2021-03-02
    Posts
    7


    Default MTM800E no audio output

    Hi everyone.

    I have a problem with a Moto MTM800E that i use as a dmo link and svxlink. I use an R1 2020 sound card like the one on this page https://vktetra.com/build-your-own-g...-to-the-radio/

    The raspi detects the sound card and the 3.3 volt ftdi cable. I receive TG conversations and SDS command reports, but when i transmit with a portable radio, no audio comes out through the MTM800E.

    Anyone know what the problem could be?

    I have the external output through the rear connector configured in the codeplug.

    Thanks

    Alex

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 25
    Join Date
    2015-02-06
    Posts
    26


    Default Re: MTM800E no audio output

    hi. probably correct pinout of radio side listed in column "R1 2020 Socket" and also correct connection pins shown in foto above table

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •