Thanks Thanks:  1
Showing results 1 to 3 of 3

Thread: Looking for CPS ********

  1. #1
    Junior Member Reputation: 10
    Join Date
    2021-03-02
    Posts
    7

    Default Looking for CPS ********

    Hi all.

    I am looking for ******** Tetra CPS or CPS Plus R6x.472.02 for R13.000.5834.

    If anyone can help me I will be grateful.

    Thanks

    Alex

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 207
    Join Date
    2014-03-09
    Location
    Hungary
    Posts
    495

    Default Re: Looking for CPS ********

    R6C.472.02 is MR5.6.1 from April 2008.and it is for R13.000.5848.
    R13 = ******** MTP850, 380MHz version.

    I'm higly recommend upgrade it to FW846x.

    All the older softwares are here:
    http://cloud.kyme32.ro/ftp_backup/

    go to T E T R A S O F T folder then go to TETRA subfolder.
    Last edited by 580-Gabor; 2021-04-12 at 07:10 PM

  4. Thanks EACanarias2 thanked for this post
  5. #3
    Junior Member Reputation: 10
    Join Date
    2021-03-02
    Posts
    7

    Default Re: Looking for CPS ********

    Quote Originally Posted by 580-Gabor View Post
    R6C.472.02 is MR5.6.1 from April 2008.and it is for R13.000.5848.
    R13 = ******** MTP850, 380MHz version.

    I'm higly recommend upgrade it to FW846x.

    All the older softwares are here:
    http://cloud.kyme32.ro/ftp_backup/

    go to T E T R A S O F T folder then go to TETRA subfolder.
    Hi Gabor. Thank you very much for your help.

    I am starting to learn about tetra structure. I still have a lot left.

    For now, I have a MTP850 and a MTM5400. With the second I have not had any problems, but with the MTP850 yes.

    It doesn't go into programming mode and I don't know if it's the fault of the CPS. I still don't know how to upload the firmware to the MTP850.

    Again, thank you very much.

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •