CW Scanning with TEMS Investigation and SE handsets?

[cdmahn]

Hi,

Is T610 the only that support CW scanning among all SE handsets?

Is there anyone here use SE T610 to scan CW in GSM/WCDMA systems? I tried to use T610 with TI 8.0.3 for sometimes, but it always made error message and closed TI application. Is there any fixed idea?

Thank you

[PaleNxtTel]

Hi,

Is T610 the only that support CW scanning among all SE handsets?

Is there anyone here use SE T610 to scan CW in GSM/WCDMA systems? I tried to use T610 with TI 8.0.3 for sometimes, but it always made error message and closed TI application. Is there any fixed idea?

Thank you

Z750i can do scanning but i'm not sure if TI 8.xx could support it. but TI9 support it for sure.

[justdream]

TI 8.x couldn't support Z750i

[crisnspro]

Hi,

Is T610 the only that support CW scanning among all SE handsets?

Is there anyone here use SE T610 to scan CW in GSM/WCDMA systems? I tried to use T610 with TI 8.0.3 for sometimes, but it always made error message and closed TI application. Is there any fixed idea?

Thank you

the TI 8.0 do the T610 CW scanning exists bug, but the E******* has no patch for that, the workaround is using the TEMS 7.x for GSM CW scanning;
not only the T610, the T68 and R520 also can do the GSM CW scanning within TEMS 6.x;
for the WCDMA cw scanning, you just use the scanner only, if you want to do the WCDMA CPICH scan, the TEMS Z750 and later phones (with TEMS investigation 9.x and 10.0) all support it. only Sony E******* phone support it, no Nokia or others.