Thanks Thanks:  1
Showing results 1 to 4 of 4

Thread: SeeGull Assistant don't see my IBflex via ethernet port

  1. #1
    Senior Member Reputation: 1536
    Join Date
    2007-10-24
    Location
    Nauru
    Posts
    467


    Default SeeGull Assistant don't see my IBflex via ethernet port

    I set IP at IBflex to 192.168.2.100/255.255.255.255
    i set IP at Laptop to 192.168.2.2/255.255.255.255

    reboot scanner, ping work OK
    Pinging 192.168.2.100 with 32 bytes of data:
    Reply from 192.168.2.100: bytes=32 time=4ms TTL=64
    Reply from 192.168.2.100: bytes=32 time=2ms TTL=64
    Reply from 192.168.2.100: bytes=32 time=2ms TTL=64

    i has FULL unit, all licenses enabled, Ethernet/wifi/BT too.
    i see scanner from phone via BT.

    but SeeGull Assistant 2.2.6.0 don't see my scanner via Ethernet ((

    how to fix this ?

    thanks/
    Last edited by carver; 2020-11-28 at 04:47 AM
    /carv

  2. Thanks william.dg08 thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     

  4. #2
    Senior Member Reputation: 684
    Join Date
    2009-04-04
    Location
    Bulgaria
    Posts
    389


    Default Re: SeeGull Assistant don't see my IBflex via ethernet port

    Hi,

    Are you sure that your scanner can be connected to SeaGull Assistant through Ethernet?

    I've connected IbFlex only through USB cable.

    Can't you use USB instead of Ethernet?

    Regards,
    Rooster[BG]

  5. #3
    Senior Member Reputation: 1536
    Join Date
    2007-10-24
    Location
    Nauru
    Posts
    467


    Default Re: SeeGull Assistant don't see my IBflex via ethernet port

    of course USB works. but the scanner is only two years old, and the USB already needs to be re-soldered.
    and most importantly, remote work. over ethernet - I can work from 500 km.
    that's why I asked my question. Thanks.
    /carv

  6. #4
    Senior Member Reputation: 684
    Join Date
    2009-04-04
    Location
    Bulgaria
    Posts
    389


    Default Re: SeeGull Assistant don't see my IBflex via ethernet port

    Hi,

    I understand your point of view.

    I can't help unfortunately as I've used IBflex only with Nemo products and since they don't offer connectivity through Ethernet I never used such type of connectivity.

    Regards,
    Rooster[BG]

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •