-
Junior Member
Reputation: 14
Calculating Signal strenghts in different frequency bands
Fellow experts out there,
What is the equation/factors used to calculate a signal level or received power levels between different bands
For example what is the equivalent signal level of -96dBm (1800 GSM) in 2100 and say 3G?
Can you please enlighten me.
-
2020-10-14 03:45 AM
# ADS
Circuit advertisement
-
Re: Calculating Signal strenghts in different frequency bands
Friis equation: 20 log10 (f1/f2), the higher frequency the higher losses
-
Senior Member
Reputation: 722
1 out of 1 members found this post helpful.
Re: Calculating Signal strenghts in different frequency bands
Another point is that you cannot compare the same signal level with different technologies. The same absolute value for signal level has not the same signal quality in GSM and WCDMA.
In order to compare the same signal value I would say that you need to do two different link budgets and so compare how a especific signal value has different coverage on the technology chosen.
I hope it helps
Nyquist
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 591
Re: Calculating Signal strenghts in different frequency bands
Eric, the SS will depend on the frequency, clutter (terrain + morphology), the placement of antenna(antenna height of BS and UE). If the antenna height is above the average roof top level, then it is a macro-cell. If not, it is a microcell. You need to select an appropriate propagation model based on the type of cell and frequency range supported.
-
Senior Member
Reputation: 361
Re: Calculating Signal strenghts in different frequency bands
Its logaritmic of the frequency band, in general 1800 and 2100 MHz should has similar signal strength.
Best people are those who are useful to others
-
Member
Reputation: 33
Re: Calculating Signal strenghts in different frequency bands
Originally Posted by
yoyokdp
Its logaritmic of the frequency band, in general 1800 and 2100 MHz should has similar signal strength.
But, dear my friend,
How about affect of modulation of technologies? Example LTE1800MHz is different from GSM1800MHz...
So, I think begin from Pathloss Formulation is the better way...
Bookmarks