Thanks Thanks:  2
Showing results 1 to 2 of 2

Thread: What is the meaning and uses of the different fields inside the MEASUREMENT REPORT ma

  1. #1
    Junior Member Reputation: 10
    Join Date
    2020-09-10
    Posts
    1


    Question What is the meaning and uses of the different fields inside the MEASUREMENT REPORT ma

    When a 2G MS receives a paging message and connects to the network, it starts sending MEASUREMENT REPORT massages. I noticed that the message contains a TA value (timing advance) indicating the time taken for the signal to reach between the MS and the BTS. Strangely enough, I found that the TA values sometimes change quite rapidly (e.g. from 0 to 2 in a few seconds). All the messages have the same Cell-ID so it is not Happening due to handovers. Anyone know what's going on and why it is happening?

  2. Thanks sandyss thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Member Reputation: 224 macro's Avatar
    Join Date
    2019-04-04
    Location
    War
    Posts
    281


    Default Re: What is the meaning and uses of the different fields inside the MEASUREMENT REPOR

    I can assume that this is due to radio conditions. For example, a phone can react in this way due to reflected signals. Try in another MS and try to change radio conditions

  5. Thanks sandyss thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •