-
Member
Reputation: 68
Huawei u2000
dears
how to recognize the RRU ports as TX and RX are properly connected to the antenna port ?
is there any command in U2000 HUAWEI?
sometimes the jumpers are wrong connected to the antenna .
how to find it by command ?
please help me
How to tell if unit ports are properly connected to the antenna.How to tell if unit ports are properly connected to the antenna.
-
2020-06-21 05:36 PM
# ADS
Circuit advertisement
-
Member
Reputation: 295
Re: Huawei u2000
U can run VSWR test in U2020
Also right click on required site in main topology and see device management
BR//
-
Senior Member
Reputation: 499
1 out of 1 members found this post helpful.
Re: Huawei u2000
Hi, you can use omstar and check ul/dl diversity, it should be like piramide, if you have stairs diagram it looks like tx/rx not properly connected
Also in omstar start antena fault diagnosis, it helps you
-
Member
Reputation: 68
Re: Huawei u2000
hi
without OMstar can not check it ?
with vswr test cant recognize the ul/dl properly coneccted to the antenna ...
please help me
thanks dears
-
Member
Reputation: 295
1 out of 1 members found this post helpful.
Re: Huawei u2000
VSWR test gives you idea.
Your case need cable tracing at site.
BR//
Bookmarks