Thanks Thanks:  3
Showing results 1 to 7 of 7

Thread: High TCP utilization

  1. #1
    Senior Member Reputation: 490
    Join Date
    2008-08-14
    Posts
    2,940


    Default High TCP utilization

    Dears,

    what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    1 out of 1 members found this post helpful.

    Default Re: High TCP utilization

    dear
    try to activate below features
    1- DPCH Power Control Based on Radio Quality
    2-DPCH Maximum Power Restriction
    also can decrease the Power Margin thd,try to balance traffic between layers......,

    Quote Originally Posted by justdream View Post
    Dears,

    what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade

  4. Thanks justdream thanked for this post
  5. #3
    Moderator Reputation: 473
    Join Date
    2009-05-02
    Location
    Nearby
    Posts
    1,237


    Default Re: High TCP utilization

    Quote Originally Posted by justdream View Post
    Dears,

    what is the solution to solve High TCP Utilization rather than MaxTxPower Upgrade
    Reduce default value for common control channels (BCH,SCH, PCH,... )


    B
    R

  6. Thanks justdream thanked for this post
  7. #4
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    Default Re: High TCP utilization

    dear
    changing the common channel power can impact the Handover SR,thanks

    Quote Originally Posted by electron View Post
    Reduce default value for common control channels (BCH,SCH, PCH,... )


    B
    R

  8. #5
    Moderator Reputation: 473
    Join Date
    2009-05-02
    Location
    Nearby
    Posts
    1,237


    Default Re: High TCP utilization

    Quote Originally Posted by mounir34 View Post
    dear
    changing the common channel power can impact the Handover SR,thanks
    Hi,

    It does not impact Handover , there might be risk of loosing indoor coverage and network to network it may vary depending to site to site distance and the frequency band. Implementing in 4 different networks the gain everywhere (all type of cluster) was more than side effect .Moreover due to spectrum curving for higher technologies these days in the world it is unavoidable to bear with some disadvantage before WCDMA sunset


    B
    R

  9. #6
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    Default Re: High TCP utilization

    i change it also in my network and badly impacted the HO and recovered after rollback the BCH Power to default value ,thanks

    Quote Originally Posted by electron View Post
    Hi,

    It does not impact Handover , there might be risk of loosing indoor coverage and network to network it may vary depending to site to site distance and the frequency band. Implementing in 4 different networks the gain everywhere (all type of cluster) was more than side effect .Moreover due to spectrum curving for higher technologies these days in the world it is unavoidable to bear with some disadvantage before WCDMA sunset


    B
    R
    Last edited by mounir34; 2020-05-19 at 03:47 AM

  10. Thanks electron thanked for this post
  11. #7
    Moderator Reputation: 473
    Join Date
    2009-05-02
    Location
    Nearby
    Posts
    1,237


    Default Re: High TCP utilization

    Quote Originally Posted by mounir34 View Post
    i change it also in my network and badly impacted the HO and recovered after rollback the BCH Power to default value ,thanks
    It depend how much you reduced it . Tell me your pre and post value relative to P-CPICH

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •