Node Parameter Reference

[live_energy]

For example,

ETHPORT

PA

Port Attribute

BTS3900, BTS3900 WCDMA, BTS3900 LTE, BTS3900 5G, BTS5900, BTS5900 WCDMA, BTS5900 LTE, BTS5900 5G

ADD ETHPORT SET ETHPORT DSP DHCPRSLT DSP ETHPORT LST ETHPORT

Indicates whether an Ethernet port is an electrical port or optical port. When the system starts, the system binds an Ethernet port to an electrical port preferentially if the default value of the port attribute is AUTO. If the BS does not support cascading, the port attribute is set to AUTO. If this parameter is incorrectly set, services of a base station will be interrupted after the base station is reset.

IPPATH

TRANSCFGMODE

Transmission Configuration Mode

BTS3900, BTS3900 WCDMA, BTS3900 LTE, BTS5900, BTS5900 WCDMA, BTS5900 LTE

ADD IPPATH MOD IPPATH LST IPPATH

Indicates the configuration mode of the transmission model. The transmission model can be configured in old or new mode. In old mode, the transmission model contains information such as cabinet, subrack, and slot numbers. Transmission configurations are bound to device boards. In new mode, the transmission model has decoupled transmission and device models. That is, transmission configuration removes unnecessary cabinet, subrack, and slot configurations.