Thanks Thanks:  1
Showing results 1 to 2 of 2

Thread: E// NCS vs NCELLREL counters

  1. #1
    Member Reputation: 27
    Join Date
    2010-08-07
    Posts
    128


    Default E// NCS vs NCELLREL counters

    Hi dear E// experts,

    Im curious about NCS measurements vs counters HOVERCNT, HOVERSUC of the ncellrel table.
    By now I dont have access to NCS but looking at the counters above is very strange that the measurement count is very low. Im curious about how this counters work and if they in fact represent all the event count on the neighbor relations of a cell.

    Thank you.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 316
    Join Date
    2010-01-05
    Posts
    108


    1 out of 1 members found this post helpful.

    Default Re: E// NCS vs NCELLREL counters

    in my opinion NCS measurement are run for a period of time and the MS just report the 6 strongest measurement (which can be neighbor or non neighbor) and also many interferes which are ignored due to wrong decoding of BCCH and BSIC .. HO Counts are based only on handover attempt that happened and not happened.. the handover are controlled with other link budget threshold and offset and are related to only cells that are declared as neighbors .. but NCS is for neighbor and non neighbor .. and we use them to chose a clean frequency !

  4. Thanks Roman99 thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •