VIP Member
Reputation: 1017
Power Control Change::MOS Improvement
dear
change the BLERQUALITY from -20 to -27 will improve the MOS as attached the result.thanks
Means:Actual value of the target BLER of DCH based on the GUI value of this parameter
Impact:
- The larger the value of this parameter:- The higher the BLER
- The lower the target SIR
- The worse the QoS.
Attached Images
Last edited by mounir34; 2019-08-13 at 07:45 PM
Post Thanks - 4 Thanks
2019-08-13 03:04 AM
# ADS
Circuit advertisement
Re: Power Control Change::MOS Improvement
Thanks mounir, MML command plz
Post Thanks - 1 Thanks
VIP Member
Reputation: 1017
1 out of 1 members found this post helpful.
Re: Power Control Change::MOS Improvement
//For AMR-NB
MOD UTYPRABOLPC:RABINDEX=0, SUBFLOWINDEX=0, TRCHTYPE=TRCH_DCH, DELAYCLASS=1, BLERQUALITY=-27,MAXSIRSTEPUP=1500, SIRADJUSTSTEP=3, INITSIRTARGET=112, MAXSIRTARGET=152, MINSIRTARGET=82;
//For AMR-WB
MOD UTYPRABOLPC:RABINDEX=1, SUBFLOWINDEX=0, TRCHTYPE=TRCH_DCH, DELAYCLASS=1, BLERQUALITY=-27,MAXSIRSTEPUP=1500, SIRADJUSTSTEP=3, INITSIRTARGET=112, MAXSIRTARGET=152, MINSIRTARGET=82;
Originally Posted by
Kazano
Thanks mounir, MML command plz
Post Thanks - 4 Thanks
Bookmarks