Thanks Thanks:  9
Showing results 1 to 3 of 3

Thread: Power Control Change::MOS Improvement

  1. #1
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    Default Power Control Change::MOS Improvement

    dear


    change the BLERQUALITY from -20 to -27 will improve the MOS as attached the result.thanks



    Means:Actual value of the target BLER of DCH based on the GUI value of this parameter
    Impact:
    - The larger the value of this parameter:- The higher the BLER
    - The lower the target SIR
    - The worse the QoS.
    Attached Images Attached Images
    Last edited by mounir34; 2019-08-13 at 07:45 PM

  2. Thanks justdream, SRRFWIRELESS7, mazinoc, kevin_h811 thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Member Reputation: 15
    Join Date
    2012-03-07
    Posts
    6


    Default Re: Power Control Change::MOS Improvement

    Thanks mounir, MML command plz

  5. Thanks mazinoc thanked for this post
  6. #3
    VIP Member Reputation: 1017
    Join Date
    2014-03-10
    Posts
    547


    1 out of 1 members found this post helpful.

    Default Re: Power Control Change::MOS Improvement

    //For AMR-NB
    MOD UTYPRABOLPC:RABINDEX=0, SUBFLOWINDEX=0, TRCHTYPE=TRCH_DCH, DELAYCLASS=1, BLERQUALITY=-27,MAXSIRSTEPUP=1500, SIRADJUSTSTEP=3, INITSIRTARGET=112, MAXSIRTARGET=152, MINSIRTARGET=82;
    //For AMR-WB
    MOD UTYPRABOLPC:RABINDEX=1, SUBFLOWINDEX=0, TRCHTYPE=TRCH_DCH, DELAYCLASS=1, BLERQUALITY=-27,MAXSIRSTEPUP=1500, SIRADJUSTSTEP=3, INITSIRTARGET=112, MAXSIRTARGET=152, MINSIRTARGET=82;



    Quote Originally Posted by Kazano View Post
    Thanks mounir, MML command plz

  7. Thanks justdream, mazinoc, kevin_h811, ulhwbest thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •