Thanks Thanks:  0
Showing results 1 to 5 of 5

Thread: Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

  1. #1
    Member Reputation: 39
    Join Date
    2012-04-06
    Posts
    26


    Default Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

    1) Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?2) Can I connect CPE (with LAN) to do DT using NEMO or GENEX?

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 439
    Join Date
    2014-03-13
    Location
    Earth
    Posts
    178


    1 out of 1 members found this post helpful.

    Default Re: Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

    1.
    there are some document about test UE released by Anite , you can check it


    https://mega.nz/#!TEgUlSbK!85EBKCdPO...UT0wTuAWZTRpuU


    However, the supported band is decided by operator. You' d better to double confirm.
    Or you can focus on samsung UE, it is easier to find official ROM of other region whose band/ feature may be what you need.


    2.
    In NO8.5.2 it has a new feature ,the description is here. Complete message in the release note.


    NATA introduces option for data testing with non-rooted, commercial Android phones


    Nemo Outdoor 8.52 introduces a new capability to support data testing with one commercial, non-rooted
    Android phone at time. The phone doesn’t need to have Nemo firmware to run the data tests. Supported
    protocols are FTP(s), HTTP(s), Iperf 3.0 and Ping. Customer will benefit with quick ability to test and try
    different terminals. Testing is made by connecting one device at time to Nemo Outdoor using USB cable.
    To get this functionality, customer don’t need to purchase Nemo firmware for the phone but just need a
    licensing option for the Nemo Outdoor software. “Nemo Active Testing
    Application for commercial, non-rooted phones”. It is an Outdoor handler that enable connecting to one
    commercial Android phone without need for special firmware or IMEI based licensing

    And in my experience, if you using a samsung UE , you can try *#0808# to check the usb setting is on/off.
    If it is enable, you can just change the setting , install samsung ADB and connect the UE to NEMO even you don't have this feature.
    But it is not recommended to connect multi UE by this method. Without NATA/(Nemo media router) the data throughput will be affected.

  4. #3
    Member Reputation: 61
    Join Date
    2017-06-06
    Posts
    14


    1 out of 1 members found this post helpful.

    Default Re: Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

    If you want a commercial UE then the Pixel 3 or Essential Phones are the only phones sold out of Japan afaik that can do B42. You might also be able to use a Huawei FWA CPE with Genex. There are also some testing UEs that the vendors sell that can do these bands.

  5. #4
    Member Reputation: 39
    Join Date
    2012-04-06
    Posts
    26


    Default Re: Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

    "You might also be able to use a Huawei FWA CPE with Genex." How can I setup GENEX to use the CPE via LAN ? (CPE only has LAN interface)Thanks for your help.

  6. #5
    Member Reputation: 39
    Join Date
    2012-04-06
    Posts
    26


    Default Re: Devices for LTE TDD 3500 (B42) ? That can work with Nemo or Genex ?

    Thanks for the reply and the documents. I have a Huawei E5776s B42 device that got bricked after some firmware update downloaded from the internet. Is there any possibility to make this device work again ?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •