Thanks Thanks:  0
Showing results 1 to 6 of 6

Thread: Atoll RSI Planning Manual

  1. #1
    Member Reputation: 55
    Join Date
    2011-11-02
    Posts
    117


    Default Atoll RSI Planning Manual

    Hi Guys, do you have the Atoll RSI Planning Manual? I tried to run the Cell-Size-Calculation AddIn module but it seems grayed out and the RSI Planning option does nothing. I have a license for this module but cannot make it run. I would really appreciate any help. Forgot to mention, I have this Atoll document, but the process is incomplete. Hope it is useful. https://www.4shared.com/file/JPYA0w41da/378800512.html
    Last edited by OKLATINGUY; 2019-07-15 at 02:32 AM

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Senior Member Reputation: 1518
    Join Date
    2010-05-11
    Posts
    468


    1 out of 1 members found this post helpful.

    Default Re: Atoll RSI Planning Manual

    Quote Originally Posted by OKLATINGUY View Post
    Hi Guys, do you have the Atoll RSI Planning Manual? I tried to run the Cell-Size-Calculation AddIn module but it seems grayed out and the RSI Planning option does nothing. I have a license for this module but cannot make it run. I would really appreciate any help. Forgot to mention, I have this Atoll document, but the process is incomplete. Hope it is useful. https://www.4shared.com/file/JPYA0w41da/378800512.html
    What version and build do you have Atoll ? For older versions of the Atoll, you must add fields. Information about this is in the documentTN015_Automatic_PRACH_RSI_Planning (3).pdf

  4. #3
    Senior Member Reputation: 750
    Join Date
    2016-10-22
    Location
    RA
    Posts
    501


    Default Re: Atoll RSI Planning Manual

    Hi, OKLATINGUY!I want to explain what actions you need to perform in order to perform calculations using the Cell-Size-Calculation AddIn module.You must add:1. in the LTE Transmitters Table table the MAX_RANGE field;2. in the Cells Table table the field CELLSIZE_RSI_MAPPING,according to the description "TN015_Automatic_PRACH_RSI_Planning (3) .pdf", which was provided by Dmitry28.After that, you will have all the tabs active in the Cell-Size-Calculation AddIn.
    Slava

  5. #4
    Member Reputation: 55
    Join Date
    2011-11-02
    Posts
    117


    Default Re: Atoll RSI Planning Manual

    Thanks for your help guys, but that file is not downloadable. The site is tricky and sends a continuous "invalid signature" message. Could you upload the file into a more reliable file sharing site? Thanks again.

  6. #5
    Senior Member Reputation: 750
    Join Date
    2016-10-22
    Location
    RA
    Posts
    501


    1 out of 1 members found this post helpful.

    Default Re: Atoll RSI Planning Manual

    Hi, OKLATINGUY!This "Cell Size Calculation" description is intended for Atoll version 3.2.1 or above.You can download the application at the following link:https://mega.nz/#!5fhACQjA!yZW-QDET-...BbzO2ZHziyK0SM
    Quote Originally Posted by OKLATINGUY View Post
    Thanks for your help guys, but that file is not downloadable. The site is tricky and sends a continuous "invalid signature" message. Could you upload the file into a more reliable file sharing site? Thanks again.
    Slava

  7. #6
    Senior Member Reputation: 750
    Join Date
    2016-10-22
    Location
    RA
    Posts
    501


    Default Re: Atoll RSI Planning Manual

    Hi, OKLATINGUY!Can you explain what version of Atoll you have?I gave you the description of "Cell Size Calculation" for Atoll version 3.2.1.Dmitry gave you a description for Automatic PRACH RSI Planning for Atoll 3.2.1.I think that Dmitry will make a link to download this file himself.
    Slava

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •