Thanks Thanks:  2
Showing results 1 to 9 of 9

Thread: Connection betwen PC and UMPT via USB port

  1. #1
    Member Reputation: 16
    Join Date
    2019-04-25
    Posts
    11


    Default Connection betwen PC and UMPT via USB port

    Hi all!

    I wish to use the USB port to connect to the UMPT of the eNodeB via web LMT. I think that I have to enable the USB port but, how can I do it if I have no connection?

    Can anybody help me?

    Thanks a lot.

    Javier

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 371
    Join Date
    2009-12-29
    Location
    hidden leaf village
    Posts
    220


    Default Re: Connection betwen PC and UMPT via USB port

    You only need to use the USB to ethernet adapter that comes with the APM cabinet. Then set you PC IP to 192.168.0.50 and connect through browser to 192.169.0.49.

    Default user and password: admin / hwbs@com

  4. Thanks carver thanked for this post
  5. #3
    Member Reputation: 16
    Join Date
    2019-04-25
    Posts
    11


    Default Re: Connection betwen PC and UMPT via USB port

    Thanks a lot for your reply. I have not the adapter of APM cabinet and I have tried with this, following your instructions: http://unotec.es/es/1817-adaptador-u...538864821.html

    It doesn't work, I think that the adapter has to be different, isn't it?

    Anyway, thank you!!

    Quote Originally Posted by jkpllan3 View Post
    You only need to use the USB to ethernet adapter that comes with the APM cabinet. Then set you PC IP to 192.168.0.50 and connect through browser to 192.169.0.49.

    Default user and password: admin / hwbs@com

  6. #4
    Member Reputation: 108
    Join Date
    2015-01-07
    Posts
    124


    Default Re: Connection betwen PC and UMPT via USB port

    Quote Originally Posted by Billy_ga View Post
    Thanks a lot for your reply. I have not the adapter of APM cabinet and I have tried with this, following your instructions: http://unotec.es/es/1817-adaptador-u...538864821.html

    It doesn't work, I think that the adapter has to be different, isn't it?

    Anyway, thank you!!
    Yes, as the cable you need is not a normal USB to ethernet adapter. Thats why it is not working. You need to buy a Huawei LMT cable, not a normal USB to ethernet converter.

    Found a correct cable for you:

    https://es.aliexpress.com/item/BBU39...846737047.html
    Last edited by subway; 2019-06-18 at 11:41 PM

  7. Thanks carver thanked for this post
  8. #5
    Member Reputation: 16
    Join Date
    2019-04-25
    Posts
    11


    Default Re: Connection betwen PC and UMPT via USB port

    Ohhh, you are so kind!!!

    Thank you very much...



    Quote Originally Posted by subway View Post
    Yes, as the cable you need is not a normal USB to ethernet adapter. Thats why it is not working. You need to buy a Huawei LMT cable, not a normal USB to ethernet converter.

    Found a correct cable for you:

    https://es.aliexpress.com/item/BBU39...846737047.html

  9. #6
    VIP Member Reputation: 1786 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    547


    Default Re: Connection betwen PC and UMPT via USB port

    thanks for the topic and comments.

    I also bought two cables on aliexpress,
    but noticed that on ebay or avito - they are cheaper.

    ..also, i make handmade USB3-RJ45 cable for 40-50 cents,
    it works, but it is terrible, need to buy connectors with covers
    and stop use cat5 cable for anything ))
    Last edited by carver; 2019-08-06 at 06:01 AM
    /carv

  10. #7
    VIP Member Reputation: 1786 carver's Avatar
    Join Date
    2007-10-24
    Location
    Ukraine
    Posts
    547


    Default Re: Connection betwen PC and UMPT via USB port

    I have a small question about 192.168.0.49

    on the version V100R009C00SPC130 I had Web LMT directly from the UMPT board.
    (addr in IE: 192.168.0.49:443/)

    after updating the board on V100R013C10SPC180 - I need to run WebLMT from my laptop
    (addr in IE: 127.0.0.1:822).

    How to enable WebLMT on the board again?

    Thanks
    /carv

  11. #8
    Member Reputation: 16
    Join Date
    2019-04-25
    Posts
    11


    Default Re: Connection betwen PC and UMPT via USB port

    Hi Carver.

    Maybe, after SW change, the IP address has changed, try with 17.21.2.15, sometimes it happened to me.

    Regards

  12. #9
    Member Reputation: 25
    Join Date
    2010-08-03
    Posts
    116


    Default Re: Connection betwen PC and UMPT via USB port

    Hello Carver:
    I use to connect to the UMPT almost everyday and I use the same way I have been using since years ago, just write the Ip address 192.168.0.49 in the web browser (explorer, firefox..etc) and set the local IP in my computer within the same network segment (example 192.168.0.50).
    User and password, just depends on your network, if new UMPT from factory the dault is user: admin pass: hwbs@com.
    I have BTS with version 13 and version 15, UMPTg2, UMPTe..etc. doesnt matter, it is the same

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •