-
Member
Reputation: 79
Inactivity timer for LTE TDD
Hello Experts,
what's the recommended value for inactivity timer for LTE TDD (fixed CPEs scanario)
thanks,
-
2018-12-27 04:06 PM
# ADS
Circuit advertisement
-
VIP Member
Reputation: 1791
Re: Inactivity timer for LTE TDD
we kept it default, we tried increasing it too. but did not make much difference in service connectivity but RRc license requirement increased. I would not recommend it.
Auto_art Default PAS: london
pl rate threads for their usefulnes
share & care
-
Post Thanks - 2 Thanks
-
Member
Reputation: 108
Re: Inactivity timer for LTE TDD
On Huawei we use 20 seconds for a TDD WTTx-like scenario. Lowering it too much will result in increased (and unnecessary) signalling load. I would recommend something between 20 and 30 seconds for WTTx 10-20 seconds for normal MBB usecase. You can also investigate by analyzing your current pattern to see if the setting is not too low/high for your current usecase.
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 419
Re: Inactivity timer for LTE TDD
Agree with subway, 20s is good and 10s is good for mobile(celluar).
-
Post Thanks - 1 Thanks
-
Member
Reputation: 125
Re: Inactivity timer for LTE TDD
Hi rimoucha,
The comment of the subway is valid, but only after making an evaluation of its standard, then you can decide if you will use a value or not.
Best regards.
-
Post Thanks - 1 Thanks
Bookmarks