Thanks Thanks:  1
Showing results 1 to 5 of 5

Thread: Low HSDPA Throughput_HUAWEI

  1. #1
    Member Reputation: 48
    Join Date
    2012-06-06
    Posts
    87


    Default Low HSDPA Throughput_HUAWEI

    Dear Expert

    One of my cell was running with Low throughput. I have Change below parameter to increase HSDPA throughput.

    Allocate Code Mode:
    Manual to Automatic
    Code Number for HS-PDSCH:
    no change(5)

    Code Max Number for HS-PDSCH:
    0 to 15
    Code Min Number for HS-PDSCH:
    0 to 5

    Code Number for HS-SCCH:
    4 to 2

    HS-PDSCH MPO Constant:

    2.5DB to 0DB

    Result:
    I have found improvement 400 to 800 Kbps.

    How can i improve it to 1 Mbps or Higher(Operator requirement).


    Pls Help this in this regard. Your cooperation will be count to me


    Thanks
    Miles

  2. Thanks justdream thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Users Awaiting Email Confirmation Reputation: 55
    Join Date
    2012-12-24
    Posts
    33


    Default Re: Low HSDPA Throughput_HUAWEI

    §OPT 1 . HSDPA radio resource allocation strategies, whole network
    SET MACHSPARA: LOCELL=0, RSCALLOCM=POWERCODE_BAL

    This feature can balance the consumption of currently available code resources and power resources, to avoid code or power unilaterally congestion in order to improve resource utilization, enhance cell capacity. Relative to the code priority, the power code balance can enhance the cell downlink load, while reducing the resource utilization of code.

    CODE_PRI: Code resource priority allocation strategy is mainly used in the power-limit scenario, this strategy led to a low ratio of power resource utilization in the power not limit scenario, thereby reducing the system throughput.

    POWER_PRI: power resources for priority allocation, mainly used in the code resource constrained scenario, this strategy led to a low ratio of code resource utilization in the code not limit scenario, thereby reducing the system throughput.

    §OPT 2. Configuring CQI Adjustment Based on Dynamic BLER Target
    SET MACHSPARA: LOCELL=0, CQIADJALGOFNONCON=CQI_ADJ_BY_DYN_BLER;
    With this feature, the NodeB can dynamically select the optimum BLER target value based on the channel quality fluctuation of HSDPA users. The NodeB then adjusts the Channel Quality Indicator (CQI) accordingly, improving user throughput and cell throughput.

    NO_CQI_ADJ: The UE measures the Ec/No of the Common Pilot Channel (CPICH) and adds a Measurement Power Offset (MPO) as the Ec/No estimation value of the HS-PDSCH. That is, the UE assumes that the NodeB transmits the HS-PDSCH according to CPICH Power + MPO. Then, add the SF gain 10 * log16 to obtain the SNR of the HS-PDSCH. Obtain the CQI according to the relationship between the SNR and CQI of the simulated HS-PDSCH.

    CQI_ADJ_BY_IBLER: 1st SBLER indicates the BLER of initial data transmission, also called IBLER. With this feature ,NodeB can adjust CQI to a proper value according IBLER . But in some scenario ,If the SBLER is always around 10% no matter how you move the position, it may results from enabling the function of channel adjustment.

    §OPT 3. status transfer parameter optimization

    state transition.jpg

  5. #3
    Member Reputation: 48
    Join Date
    2012-06-06
    Posts
    87


    Default Re: Low HSDPA Throughput_HUAWEI

    Dear tarek_gara
    Thanks.
    I will try this parameter and will let you know the improvement action.


    Is there any suggestions from other Experts?


    BR//
    Miles

  6. #4
    Member Reputation: 48
    Join Date
    2012-06-06
    Posts
    87


    Default Re: Low HSDPA Throughput_HUAWEI

    Quote Originally Posted by tarek_gara View Post
    §OPT 1 . HSDPA radio resource allocation strategies, whole network
    SET MACHSPARA: LOCELL=0, RSCALLOCM=POWERCODE_BAL

    This feature can balance the consumption of currently available code resources and power resources, to avoid code or power unilaterally congestion in order to improve resource utilization, enhance cell capacity. Relative to the code priority, the power code balance can enhance the cell downlink load, while reducing the resource utilization of code.

    CODE_PRI: Code resource priority allocation strategy is mainly used in the power-limit scenario, this strategy led to a low ratio of power resource utilization in the power not limit scenario, thereby reducing the system throughput.

    POWER_PRI: power resources for priority allocation, mainly used in the code resource constrained scenario, this strategy led to a low ratio of code resource utilization in the code not limit scenario, thereby reducing the system throughput.

    §OPT 2. Configuring CQI Adjustment Based on Dynamic BLER Target
    SET MACHSPARA: LOCELL=0, CQIADJALGOFNONCON=CQI_ADJ_BY_DYN_BLER;
    With this feature, the NodeB can dynamically select the optimum BLER target value based on the channel quality fluctuation of HSDPA users. The NodeB then adjusts the Channel Quality Indicator (CQI) accordingly, improving user throughput and cell throughput.

    NO_CQI_ADJ: The UE measures the Ec/No of the Common Pilot Channel (CPICH) and adds a Measurement Power Offset (MPO) as the Ec/No estimation value of the HS-PDSCH. That is, the UE assumes that the NodeB transmits the HS-PDSCH according to CPICH Power + MPO. Then, add the SF gain 10 * log16 to obtain the SNR of the HS-PDSCH. Obtain the CQI according to the relationship between the SNR and CQI of the simulated HS-PDSCH.

    CQI_ADJ_BY_IBLER: 1st SBLER indicates the BLER of initial data transmission, also called IBLER. With this feature ,NodeB can adjust CQI to a proper value according IBLER . But in some scenario ,If the SBLER is always around 10% no matter how you move the position, it may results from enabling the function of channel adjustment.

    §OPT 3. status transfer parameter optimization

    state transition.jpg
    Dear tarek_gara
    Below recomended paramter is for RNC level. If i change this parameter in RNC level, then which impact might be found in cell cell level. NB: maxmum of are have good throughput (>1 Mbps).
    So what should i do brother?
    Pls recomend,

    §OPT 3. status transfer parameter optimization


  7. #5
    Senior Member Reputation: 491
    Join Date
    2008-08-14
    Posts
    2,956


    Default Re: Low HSDPA Throughput_HUAWEI

    Quote Originally Posted by miles12 View Post
    Dear tarek_gara
    Thanks.
    I will try this parameter and will let you know the improvement action.


    Is there any suggestions from other Experts?


    BR//
    Miles
    Dear, could you please share the result of testing this suggestion ?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •