Getting CFGMML export for 2G/3G

[grishman]

Hello dear members,

I need to get CFGMML export from 2G/3G HUW network, to introducein Aexio optimisation tool.

What I have been shown it to get this by LMT. I would appreciate if somebody can provide me the software (R15).
And if there is any other way to get this information (without LMT) I appreciate it.

Best regards
GM

[b0r3l_1]

Hi

Usually you don't need a software installer to get LMT. Its a web based application, you only need the IP of the RNC to access together with an admin account. Just type EXP CFGMML in the MML page and after that get the exported data from the file manager (usually at the left part of the LMT window there's a folder ICON) or using ftp.

Thanks

[daniel10111529]

Hi, Normally RNC create a MML config file each day like a backup automatically. Only you need to find the correct route of this file. \bam\version_b\ftp\export_cfgmml.

BR
Daniel

[peanut]

Dear,

You need access to OMC-R to get the CFGMML,

You retrive it simply by ftp from the needed RNC.

it not found try to generate it by executing the command in the needed RNC (export CFGMML:

Best regards,