Transmission BW

[justdream]

Dears,

How could I know the exact Transmission BW configured for Huawei NodeBs

[uel888]

You can check with your transport . :-)

[justdream]

:-)
I need to get this data by myself for all NodeBs in the network

[ivanbrij]

You can check TX/RX BW with these commands at NodeB:

LST RSCGRP:;
LST IPPATH:;
LST ETHPORT:;

At RNC:

LST ADJNODE:;



Please add REP

Ivan

[dacoder]

You can check TX/RX BW with these commands at NodeB:

LST RSCGRP:;
LST IPPATH:;
LST ETHPORT:;

At RNC:

LST ADJNODE:;



Please add REP

Ivan

The Forward Bandwidth and Background Bandwidth value in LST ADJNODE command is only valid when IS IP POOL is set to YES. How to know the NodeB bandwidth from RNC when that parameter (IS IP POOL) is set to NO?

thanks

[justdream]

You can check TX/RX BW with these commands at NodeB:

LST RSCGRP:;
LST IPPATH:;
LST ETHPORT:;

At RNC:

LST ADJNODE:;



Please add REP

Ivan

LST RSCGRP - It gives me Blank Data
LST IPPATH - which parameter should I check in this family?
LST ETHPORT - I think you are talking about Maximum Transmission Unit(byte) Parameter, Right?

Another question please, this TX/RX BW is shared between all technologies 3G/4G, Right?