First steps in the Optimization flow, Vodafone 2010

[primig]

http://www.4shared.com/folder/EDa32Wr1/

-

High level Optimization work flow for optimization Version 1.0

1. What is Network Optimization?
2. How Network Optimization fit into the big picture
3. Optimization Flow description


Radio Network Audit -Data collecting- Version 1.0

1. Objective
2. Scope
3. Introduction
4. Radio Network Design
I. General
II. Radiant System solution
III. Radio Access equipment
IV. Iub Interface Design/Topology
V. Transport network Design/Topology
VI. Template
5. Radio Network Configuration Data

Radio Network Audit -Consistency check- Version 1.0

1. Objective
2. Scope
3. Consistency Check
4. Inconsistencies Audit Analysis
5. Features Audit

Settings & Configuration -Power settings- Version 1.0

1. Introduction
2. Reference Point
3. Losses
4. Max Transmission Power
5. CPICH Power Setting
6. Common Channels Power Setting

Settings & Configuration -Second carrier guideline- Version 1.0

1. Objective
2. Scope
3. Process for additional carrier expansion
4. Inter-working functions
5. Deployment and configuration examples
6. Appendix

Settings & Configuration -HW Site configuration- Version 1.0

1. Objective
2. Scope
3. Site Configurations
1. RF Elements
2. UMTS configurations
3. UMTS + GSM900/1800 configurations
4. UMTS + GSM900 + GSM1800 configurations
5. Appendix

Settings & Configuration -ATM & IP Overview- Version 1.0

AAL2PATH & IPPATH Setting & Configuration
1. - UMTS TX INTERFACES SOLUTIONS
2. - ATM OVERWIEW
3. - IP Overview
4. - IUB Settings & Configurations
5. - IUR Settings & Configurations
6. - IU-CS & IU-PS Settings & Configurations.
7. - COMMON QUESTIONS

Dimensioning -Interfaces Dimensioning (lu-CS, lu-PS,luR,luB)- Version 1.0

Introduction
lu-CS, lu-PS, luR & luB dimensioning
-ATM
lu dimensioning
-IP
-Deployment groups
-Bandwidth guarantee criteria


Dimensioning -Node B dimensioning- Version 1.0

1. Objective
2. Node B dimensioning elements definitions
3. Node B common limitations & capabilities
4. Node B planning
i. Initial deployment phase
ii. Optimization phase
iii. Node B configuration examples