TMA Configuration

[justdream]

Dears,

Which Parameters I've to configure when I add 2G/3G TMA?

[bluep]

Very simple, in my 2G ALU System :
adding DC current threshold ( min-max in mA ), Loss feeder estimate, loss Tx TMA and TMA Gain
Then restart equipments again

[bluep]

IN Huwei : TMA setting

[justdream]

IN Huwei : TMA setting

Gooood, Do you have same for 3G Please

[sonerss]

First you have to enter "SCN ALD" command in NodeB side, after then it gives you a serial number of antennas and tma
After then you can enter commands which show in below.

MOD ANTENNAPORT: CN=0, SRN=4, SN=0, PN=R0A, PWRSWITCH=ON;
ADD TMA: DEVICENO=40, DEVICENAME="DTMA40", CTRLCN=0, CTRLSRN=4, CTRLSN=0, SUBUNITNUM=2;,VENDORCODE="HW",SERIALNO="";