-
Senior Member
Reputation: 491
2G/3G coverage limit
Dears,
Kindly share all 2G/3G parameters and actions you have already tested for coverage limit in both accessibility & handover..
my objective is limiting coverage for special site designed to cover only top security place around 1 km
-
2015-04-17 04:13 AM
# ADS
Circuit advertisement
-
Senior Member
Reputation: 491
Re: 2G/3G coverage limit
-
Member
Reputation: 27
Re: 2G/3G coverage limit
you can try lower value for "Max TA"
-
Post Thanks - 1 Thanks
-
Senior Member
Reputation: 311
1 out of 1 members found this post helpful.
Re: 2G/3G coverage limit
Originally Posted by
justdream
Dears,
Kindly share all 2G/3G parameters and actions you have already tested for coverage limit in both accessibility & handover..
my objective is limiting coverage for special site designed to cover only top security place around 1 km
In 2G network has timing advanced information, that show distance from BTS and MS, network can use it to control MS, I mean Max TA can use as reference for your purpose.
In 3G, propagation delay has the same meaning, but I never saw the network can use it to control accessibility or handover of UE. Hence I don't think have any parameters in 3G can prevent UE' accessibility in special area. But you can use "cell reserved" to prevent almost UE to access the network and only allows some classes UE, which need to define can access the network.
-
Post Thanks - 1 Thanks
-
Member
Reputation: 15
Re: 2G/3G coverage limit
in 3G network you can try the parameter ocal Cell Radius
meaning;Indicates the radius of a local cell, affecting cell coverage. It is set according to the network plan. A small cell radius causes user access failure to some or all coverage under certain configuration
-
Post Thanks - 2 Thanks
-
Senior Member
Reputation: 311
1 out of 1 members found this post helpful.
Re: 2G/3G coverage limit
Originally Posted by
oussama85
in 3G network you can try the parameter
ocal Cell Radius
meaning;Indicates the radius of a local cell, affecting cell coverage. It is set according to the network plan. A small cell radius causes user access failure to some or all coverage under certain configuration
Thanks, I forgot. It's Local Cell Radius parameter in Huawei system and cell range in E// system. Both of them is NodeB parameter.
Defines the maximum range (in meters) for random access detection (random access distance). For soft handover the RBS adds a soft handover margin internally. Note that the actual cell range resolution is 3 chips, that is, around 234 m
-
Post Thanks - 1 Thanks
-
Member
Reputation: 238
Re: 2G/3G coverage limit
Hi
2g..u can try Rxlevelacessmin, sl, msMaxDistInCallSetup
Rgds
Plannerguy
-
Senior Member
Reputation: 491
Re: 2G/3G coverage limit
Originally Posted by
plannerguy
Hi
2g..u can try Rxlevelacessmin, sl, msMaxDistInCallSetup
Rgds
Plannerguy
Dear, what is SL
and what's the exact name and description of msMaxDistInCallSetup as I didn't find it in Huawei
-
Member
Reputation: 138
Re: 2G/3G coverage limit
I tried to enable msMaxDistInCallSetup but it is not working?
Is there any related parameters to activated?
-
Member
Reputation: 24
Re: 2G/3G coverage limit
For 2G, you may try ACCMIN
For 3G, how about adjusting the Local Cell Radius
Best Regards
juanpico
Bookmarks