Thanks Thanks:  10
Showing results 1 to 4 of 4

Thread: comparing FSMF and FSME productivity

  1. #1
    Junior Member Reputation: 13
    Join Date
    2013-04-05
    Posts
    9


    Default comparing FSMF and FSME productivity

    Hello,
    Please share some info comparing efficiency of FSMF and FSME system modules for FDD UMTS. What configuration will have more capacity - FSME or FSMF, FSME+FSME extension or FSMF with FBBA modules and etc.

  2. Thanks sad_RNP thanked for this post
  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  4. #2
    Member Reputation: 119
    Join Date
    2008-09-18
    Posts
    249


    Default Re: comparing FSMF and FSME productivity

    FSME contains 17 BB units each one consists of 48 CE however FMSF contains of 6 BB units each one consist of 96 CE. FSMF support some features in LTE which not supported by FSME

    hope this enough for u

  5. Thanks Lotrus thanked for this post
  6. #3
    Junior Member Reputation: 12
    Join Date
    2014-06-24
    Posts
    5


    1 out of 1 members found this post helpful.

    Default Re: comparing FSMF and FSME productivity

    Hi,

    You can find some information on attached file.

    http://www.4shared.com/zip/uJ_pKTrgc...MF_Config.html

    BR,
    Pires

  7. Thanks rkdrkd, lteexpert, hendral, sad_RNP, Lotrus, siankirene thanked for this post
  8. #4
    Junior Member Reputation: 13
    Join Date
    2010-03-18
    Posts
    26


    Default Re: comparing FSMF and FSME productivity

    Comparing to FSME,
    available capacity(for trafffic use) of FSMF less depend on number of commissioned cells.
    If does not matters if you configure 3 cells or 6 cells in FSMF.

    One type of Extension submodule available for FSMF --> WCDMA: FBBA (6 Sub Unit)
    Up to 2 Extension submodules can be used to extend capacity of single FSMF

    Max Configuration:-
    1 x FSMF + 2 x FBBA left you 17.5 Sub Unit(For traffic use) assume 6 cell (10km with 2 Rx Div)

    R99 CE:-
    FSME 1 SU=48CE
    FSMF 1 SU=96CE
    If you find my post useful please add reputation.
    DEFAULT PASSWORD : helloworld

  9. Thanks sad_RNP, Lotrus thanked for this post

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •