-
Junior Member
Reputation: 10
Flashing T610 TEMS question
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"
the fourthstep is fail!!!!
can you help me!!!!!!!!!!!!!!!!!!!!!!!!111
-
2009-04-19 04:36 PM
# ADS
Circuit advertisement
-
Moderator
Reputation: 520
Originally Posted by
yy19820503
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"
the fourthstep is fail!!!!
can you help me!!!!!!!!!!!!!!!!!!!!!!!!111
Hi
Please refer to the followings:
http://www.finetopix.com/showpost.ph...5&postcount=10
Suggestion:
- Retry to do it again and again...Make sure your battery is full...
- If your phone is locked to one operator, try to unlock it first (using free program as pBBSE etc)
Good luck
parto_tegal
-
Member
Reputation: 19
Originally Posted by
yy19820503
e.Type the instruction: setool /0 /b$400000 /l$400000, press[ENTER],will appear:
"main boot loop is begin....
bootstrap first step............ok!
bootstrap second step ok!
bootstrap third step ok!
bootstrap fourth step ...fail
asic id: 5B080201
bypass bott err:0106"
the fourthstep is fail!!!!
can you help me!!!!!!!!!!!!!!!!!!!!!!!!111
use this
http://rapidshare.com/files/223247324/setool.rar
without 4step fail
-
Junior Member
Reputation: 10
I tried several times to determine the battery also is filled with red. Cell phones are not locked.
Is still the problem.
help me!!!!!!!!!!1
-
Moderator
Reputation: 520
It's very tricky..
Hi
Thought this is a very tricky procedure to get it run well...
1. Make sure to clean the phone connector with a good cleaner agent
2. Make sure to charge your battery fully
3. At the first, do not connect the cable and release the battery!
4. Do the process on following procedure:
- Run the DOS command
- Connect the cable
- Insert the battery and hold with your hand
- Wait until pass all the bypass procedures,
- Slide the battery cover carefully when you feel tired holding it
Good luck
parto_tegal
-
Junior Member
Reputation: 10
[quote=parto_tegal;46317]Hi
Thought this is a very tricky procedure to get it run well...
1. Make sure to clean the phone connector with a good cleaner agent
2. Make sure to charge your battery fully
3. At the first, do not connect the cable and release the battery!
4. Do the process on following procedure:
- Run the DOS command
- Connect the cable
- Insert the battery and hold with your hand
- Wait until pass all the bypass procedures,
- Slide the battery cover carefully when you feel tired holding it
Good luck
thank you for parto_tegal
it's ok
-
Moderator
Reputation: 520
thank you for parto_tegal
it's ok
Thanks button and reputation are there... You knows how to thanks...
Regards
parto_tegal
-
thank you for parto_tegal
you are superman
Bookmarks