-
Member
Reputation: 25
E******* Network setting for Latency for Datacard and UE
Dear Experts ,
Need your support to find out solution about Latency issue .
I have tested Ping from Data card and UE in 5 diffrent ping packet type (32,100,200 and so on) , Below are my observation
1. DATA CARD - Channel type FACH for firts four test (32,100,200,300 and 400 byte ping) , DCH for 500 Byte.
2. UE W995 - Channel type DCH for all scenario .
Dlrlcbufferupswitch/ ULrlcbuffupswitch is 1000/512.
Please suggest .
many Thanks
Sumit Kumar Jha
-
2015-01-10 02:52 AM
# ADS
Circuit advertisement
-
Member
Reputation: 25
Re: E******* Network setting for Latency for Datacard and UE
Dear Experts ,
Please anyone help me to understand the solution about Data card /USB Modem and UE settings.
Many Thanks
Sumit Kumar Jha
-
Re: E******* Network setting for Latency for Datacard and UE
Originally Posted by
krsumitjha
Dear Experts ,
Please anyone help me to understand the solution about Data card /USB Modem and UE settings.
Many Thanks
Sumit Kumar Jha
Hi,
Try setting 512/256 for channel switching setting.
Cheers
-
Member
Reputation: 25
Re: E******* Network setting for Latency for Datacard and UE
Many Thanks for your response ,
Setting 512/256 will be implemented for RNC , will have impact on all the UE Categories . I want to change some setting to make Datacard connection on HS which will reduce RTT as UE is already connected with DCH Channel only.
Please suggest .
Many Thanks
Sumit Kumar Jha
-
Member
Reputation: 25
Re: E******* Network setting for Latency for Datacard and UE
Originally Posted by
krsumitjha
Many Thanks for your response ,
Setting 512/256 will be implemented for RNC , will have impact on all the UE Categories . I want to change some setting to make Datacard connection on HS which will reduce RTT as UE is already connected with DCH Channel only.
Please suggest .
Many Thanks
Sumit Kumar Jha
I have found one difference Max bit rate for Downlink in case of Datacard (256000 Kbps) is very high as compared to UE (8640 Kbps) and other network setting. I guess it is related to HLR QOS .
Please suggest whether re-tuning will help or not.
Many Thanks
Sumit Kumar Jha
Bookmarks