-
Junior Member
Reputation: 10
UL_RSSI U900
Hi experts,
I have an issue on several sites with U900 E// which are suffering from high level of UL_RSSI (-95dBm) even with adding TMA. Can you help plz.
Thanks
-
2014-04-10 05:58 PM
# ADS
Circuit advertisement
-
Member
Reputation: 238
Re: UL_RSSI U900
check if there is any interfence from 2G in the uplink
-
Re: UL_RSSI U900
Originally Posted by
besooo
Hi experts,
I have an issue on several sites with U900 E// which are suffering from high level of UL_RSSI (-95dBm) even with adding TMA. Can you help plz.
Thanks
Hello,
UL RSSI can go up due to different resaons:
1) high Cell load
2) external interferences
3) it could be due to setting of HSUPA allowing more interference in UL
4) It could be as well due to poor HOSR in NBR cells
5) it could be due to missing NBR
6) it could be due to clock sync reference issue between 2 nodeBs (it is impacting HOSR)
7) It could be due to huge overlapping on Nbr cells
cheers
-
Post Thanks - 1 Thanks
-
Re: UL_RSSI U900
Hi,
It can be due to inter modulation problem too( Faulty RU, Faulty antenna, Faulty ASC,..) Miss configuration of RBS (Bypass ASC and then RBS will calculate UL RSSI by mistake)
Cheers
Originally Posted by
babak1349
Hello,
UL RSSI can go up due to different resaons:
1) high Cell load
2) external interferences
3) it could be due to setting of HSUPA allowing more interference in UL
4) It could be as well due to poor HOSR in NBR cells
5) it could be due to missing NBR
6) it could be due to clock sync reference issue between 2 nodeBs (it is impacting HOSR)
7) It could be due to huge overlapping on Nbr cells
cheers
-
Re: UL_RSSI U900
I have U900 + U2100 network, We too faced this issue and 60% cells with this issue had reason of faulty Jumpers/High VSWR or Faulty antenna port.
Rest cells are near to Airport and even our 2G side is having external interference there, We have done intermodulation tests and they are clear which means no interference from G900 is affecting U900 and vice versa.
We have identified the suspect sources and taking up with concerned teams.
--------------------------------------------------------------------------------------------------------
Thanks!
Pass: optimizer
-
Re: UL_RSSI U900
Hi khurrambilal01, would you mind telling what was the source of problem.
In the network I handle here usually because the site near prison and the government put signal blocker causing high ULRSSI.
And also for your infomation sometime the cause is because software error in RAX board.
If you see this error log in E// RBS : "UbchDeviceSet_CapacityLost" then you need to restart RBS, not just the RAX board.
Originally Posted by
khurrambilal01
We have identified the suspect sources and taking up with concerned teams.
Bookmarks