Thanks Thanks:  3
Showing results 1 to 5 of 5

Thread: InterferencePwr

  1. #1
    Member Reputation: 514
    Join Date
    2013-02-20
    Posts
    221


    Question InterferencePwr

    Hi Experts,
    Need your help.
    I have following performance/counter.


    6) ERBS EUtranCell Traffic Performance, ROP by ROP
    Report from 2014-03-14 00:00 UTC to 2014-03-14 00:59 UTC (4 ropfiles)
    Node SW: CXP102051/16_R37AJ (L12B)


    Date: 2014-03-14
    Time Counter T001 T002 T003
    00:00 Int_RadioRecInterferencePucchPwr -119.8 -121 -120.1
    00:00 Int_RadioRecInterferencePwr -118.8 -121 -119.2
    00:15 Int_RadioRecInterferencePucchPwr -119.9 -121 -120.1
    00:15 Int_RadioRecInterferencePwr -118.9 -121 -119.1
    00:30 Int_RadioRecInterferencePucchPwr -119.8 -121 -120.3
    00:30 Int_RadioRecInterferencePwr -119.1 -121 -119.9
    00:45 Int_RadioRecInterferencePucchPwr -120.1 -121 -120.4
    00:45 Int_RadioRecInterferencePwr -119.5 -121 -120.0


    Report from 2014-03-14 00:30 UTC to 2014-03-14 00:44 UTC (1 ropfiles)
    Node SW: CXP102051/16_R37AJ (L12B)


    Date: 2014-03-14
    Object Counter 00:30
    EUtranCellFDD=T001 pmRadioRecInterferencePwr 0,146863,626469,64769,17476,7126,4359,3880,5456,4375,9835,4198,2060,926,729,1479
    EUtranCellFDD=T002 pmRadioRecInterferencePwr 900000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    EUtranCellFDD=T003 pmRadioRecInterferencePwr 0,794885,56567,7336,3592,2660,2128,2360,2284,2552,10049,7864,4301,2052,1072,298


    Currently sector 2 is not carrying traffic.
    I have doubts whether there's poor RF or is it just no LTE user in that area.
    I'm working remotely.
    What does value "-121" means?

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    Member Reputation: 42
    Join Date
    2010-05-06
    Location
    Dadli
    Posts
    17


    Default Re: InterferencePwr

    Quote Originally Posted by uchok View Post
    Hi Experts,
    Need your help.
    I have following performance/counter.


    6) ERBS EUtranCell Traffic Performance, ROP by ROP
    Report from 2014-03-14 00:00 UTC to 2014-03-14 00:59 UTC (4 ropfiles)
    Node SW: CXP102051/16_R37AJ (L12B)


    Date: 2014-03-14
    Time Counter T001 T002 T003
    00:00 Int_RadioRecInterferencePucchPwr -119.8 -121 -120.1
    00:00 Int_RadioRecInterferencePwr -118.8 -121 -119.2
    00:15 Int_RadioRecInterferencePucchPwr -119.9 -121 -120.1
    00:15 Int_RadioRecInterferencePwr -118.9 -121 -119.1
    00:30 Int_RadioRecInterferencePucchPwr -119.8 -121 -120.3
    00:30 Int_RadioRecInterferencePwr -119.1 -121 -119.9
    00:45 Int_RadioRecInterferencePucchPwr -120.1 -121 -120.4
    00:45 Int_RadioRecInterferencePwr -119.5 -121 -120.0


    Report from 2014-03-14 00:30 UTC to 2014-03-14 00:44 UTC (1 ropfiles)
    Node SW: CXP102051/16_R37AJ (L12B)


    Date: 2014-03-14
    Object Counter 00:30
    EUtranCellFDD=T001 pmRadioRecInterferencePwr 0,146863,626469,64769,17476,7126,4359,3880,5456,4375,9835,4198,2060,926,729,1479
    EUtranCellFDD=T002 pmRadioRecInterferencePwr 900000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    EUtranCellFDD=T003 pmRadioRecInterferencePwr 0,794885,56567,7336,3592,2660,2128,2360,2284,2552,10049,7864,4301,2052,1072,298


    Currently sector 2 is not carrying traffic.
    I have doubts whether there's poor RF or is it just no LTE user in that area.
    I'm working remotely.
    What does value "-121" means?
    I am guessing you are referring to this 00:00 Int_RadioRecInterferencePucchPwr -119.8 -121 -120.1 it is the measured interference on the PUCCH in dBm. Those values a very good.

    Regards,
    che

  4. #3
    Member Reputation: 264
    Join Date
    2009-03-09
    Posts
    231


    Default Re: InterferencePwr

    Hi,

    Int_RadioRecInterferencePucchPwr (-119.8 -121 -120.1) show (max, min and average values) for ROP - measurement period in dBm. Int_RadioRecInterferencePwr would be the same, but for PUSCH. Judging from values, it should be give averaged out per RB (resource block)

    Now
    EUtranCellFDD=T001 pmRadioRecInterferencePwr 0,146863,626469,64769,17476,7126,4359,3880,5456,4375,9835,4198,2060,926,729,1479
    EUtranCellFDD=T002 pmRadioRecInterferencePwr 900000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    EUtranCellFDD=T003 pmRadioRecInterferencePwr 0,794885,56567,7336,3592,2660,2128,2360,2284,2552,10049,7864,4301,2052,1072,298

    are distribution for those RSSI powers over max, min and average. I can see that first value in histogram is -121, the second must be -120. You'll need to refer to eNB counter definition file - look for counters pmRadioRecInterferencePwrPrb1, pmRadioRecInterferencePwrPrb2,..,pmRadioRecInterferencePwrPrb100

    If you have nothing on you cell, then your RSSI should just thermal noise + NF.
    Thermal noise for 180kHz (BW of single RB) at 300K is:
    TH_noise = -174 dBm/hz + 10 * log(180KHz) = -174 + 53 = -121 dBm

    Assuming NF = 2, your RSSI should be about -119 dBm. However E// has reference point at the antenna port, so it might be compensating out NF.

  5. #4
    Junior Member Reputation: 12
    Join Date
    2011-02-20
    Posts
    5


    Default Re: InterferencePwr

    in moshell type:
    pmom fdd pmRadioRecInterferencePwr

    That will print out the desciption of the raw counter, and spell out what each bin range is.
    It is highly unlikely that all of the samples of a working cell would always be in the lowest bin. Even with no calls on it.
    Since it is not carrying any calls, I would hazard a guess that it may have a plumbing or antenna problem.
    What does that cell indicate for swr? has anyone been out to make test calls on the cell? Is it radiating correctly?
    In what frequency band is the cell?
    Last edited by majortom; 2014-03-18 at 10:02 AM

  6. #5
    Member Reputation: 514
    Join Date
    2013-02-20
    Posts
    221


    Default Re: InterferencePwr

    Yes you're right, I had one site that doesn't have traffic but when I check "pmRadioRecInterferencePwr" I see the sample is still spread.
    But now the site is OK after changing the RRU.

    Quote Originally Posted by majortom View Post
    in moshell type:
    pmom fdd pmRadioRecInterferencePwr

    That will print out the desciption of the raw counter, and spell out what each bin range is.
    It is highly unlikely that all of the samples of a working cell would always be in the lowest bin. Even with no calls on it.
    Since it is not carrying any calls, I would hazard a guess that it may have a plumbing or antenna problem.
    What does that cell indicate for swr? has anyone been out to make test calls on the cell? Is it radiating correctly?
    In what frequency band is the cell?

Bookmarks

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •